{{ text }}
{{ links }}
{{ text }}
{{ links }}
{{ text }}
{{ links }}
Black desktop background error on the Windows 10 is a very common issue which a lot of Windows users have encountered. Moreover, you may face this annoying error due to plenty of reasons.
After performing some particular number of operations on your Windows 10 Operating System, the screen of the desktop turns black and the wallpaper of the system gets disappeared. Additionally, this error is not a crucial one but still very frustrating at times. However, if you are struggling with this annoying issue on the Windows 10 system and wondering how to fix it, then don’t panic as you have dropped at the right page.
Here, in this informative post, we will walk you through some of the most effective and easiest troubleshooting hacks by which you can easily address this annoying technical glitch of the Windows 10 system. Therefore, without delaying too much, let’s get into the solutions directly.
You need to keep this in your mind that whenever it comes to the technical glitches, then it is never just one reason. Hence, if you are facing this same “desktop background is black” error on your Windows 10 system, then you must realize that there could be multiple reasons leading to this frustrating situation.
Thus, take a look at some generic reasons that can commonly trigger this troublesome Windows 10 issue.
As this is a technical glitch inside the Windows 10 Operating System, there are some easy workarounds that we have found useful in this scenario.
Here, in this context, we are about to explain some of the most useful and easiest troubleshooting hacks by which you can easily diagnose and fix this disturbing black desktop background error on your own.
Hence, it is suggested to follow the fixes carefully and implement them in the correct order to get instant result.
This is the most fundamental method that you should try to get rid of this annoying technical glitch. Moreover, you need to make sure that this setting is enabled on the system.
In case, you disabled this setting by mistake, then you need to re-enable it in order to fix this troublesome glitch. To perform this action, go through the following steps:
To disable the “Show lock screen background picture on the sign-in screen” settings, you need to follow some easy steps. Go through the below passage in detail to know the steps:
At last, you need to check the system to verify that the black background in the desktop issue is fixed or not. In case, this technical glitch still persists then, it is advised to move out to the next troubleshooting method given below.
Before changing the wallpaper of the system, you must disable all the third-party application of the system. After that, go through the below-mentioned easy steps to change the wallpaper:
In case, the Slideshow of the system is working properly, then you can easily change the background of the system to a static image. For better result, restart the system.
After completing all the above-described steps, you need to check your Windows 10 system to verify that the “black desktop background“ error is settled or not. In case, this technical glitch still continues, then it is recommended to refer to the next method discussed below.
Sometimes, this annoying technical glitch may arise because of the corrupted TranscodedWallpaper.jpg file of the system. In such a scenario, the Windows 10 Operating System is unable to display your chosen wallpaper on the screen.
To remove the damaged TranscodedWallpaper.jpg file, check out the steps provided below:
%USERPROFILE%\AppData\Roaming\Microsoft\Windows\Themes\
After completing all the above-described steps, follow the steps from method three and select a new wallpaper as the background of your desktop. Lastly, restart the system.
Now, check your Windows 10 system to see that the technical glitch is resolved yet or not. If the black background desktop issue still persists and averting you to use the system, then move out to the next method given below.
In case, if the above-mentioned methods did not work for you, then try this way to resolve this annoying technical glitch of the Windows 10 system.
To perform this action, check out the steps listed below:
That’s it! We hope that now you can easily resolve this “black desktop background” issue on your Windows 10 Operating System. Here, in this informative post, we have described some of the most effective and easiest troubleshooting hacks to eradicate this troublesome technical glitch within a flicker of time.
Moreover, this article assists non-tech savvy persons. Therefore, you do not require any extra technical knowledge or ideas to execute the above-mentioned troubleshooting hacks. In case, you face any issues while performing the troubleshooting methods and steps or you have any queries, then drop us a comment in the below section.
Although the use of Windows Live Mail feature is not in vogue, some Microsoft users still stick to it. Windows Live Mail error id 0x800ccc0f is one such error which you generally encounter while using Windows Live Mail.
When you stumble upon the error message termed as ‘Unable to send or receive messages for the [your account name]’, your server terminates the connection all of a sudden. The most probable causes for this issue are the problems in the server, network issues, a prolonged period of inactivity and many more.
Moreover, this error takes place owing to several other factors. Therefore, we suggest you try each of the solutions in order to counteract this error.
Therefore, delve into the top 10 tips to resolve the above-mentioned issue:
You can go through under-mentioned hacks to prevent the above-mentioned issue:
The first resort is to pull your port settings. In order to initiate the process, modify the port and change it to 995. Please ensure that you tick the SSL checkbox.
Moreover, set your port to 465 for the purpose of outgoing emails and now activate SSL. Now, check if the issue is resolved or not.
This step mainly involves switching off the third-party antivirus since it creates a major problem with the Windows Live Mail client. After doing this manipulation, if the issue ceases to exist, then you can contact the manufacturer. Otherwise, you can change the antivirus.
If deactivating antivirus doesn’t solve this problem, you can perform a thorough scan for the system. You can follow the below-mentioned steps to perform the scan effectively in Windows 10:
In Windows 8.1, you need to go to the Start Menu. Now, enter “Windows Defender” in the search bar. After that, click the option labeled as Windows Defender. Now, click on Update and click on Home. After that, move to the Scan option and click on Full. Finally, press Scan now.
In Windows 7, you just need to follow the path below.
Start -> Type ‘Defender’ into the Search box -> Windows Defender -> Scan
This step helps many users who stumble upon the Windows Live Mail error ID 800ccc0f. Let’s have a look at the under mentioned steps to accomplish this:
Finally, install it again to examine if you encounter and send messages through Windows Live Mail feature.
If the above-mentioned issue still persists, then there might be a problem in the network.
Here are some of the troubleshooting steps that you must follow to know how to fix Windows Live Mail error ID 0x800ccc0f:
Incessant occurence of Windows Live Mail error ID 0x800ccc0f signifies that network adapter is severely damaged. In such a situation, you might take the help of Device Manager. Below are the steps that you can follow to accomplish this:
After you uninstall the network adapter, you can reboot the system. With the help of the OS, you can reinstall the driver automatically. If this is not the case, you can download the latest version from the manufacturer’s website and then, start installing it in your PC.
In order to initiate the process, you need to open the Device Manager. After that, choose network adapter from the available list. and select Update Driver Software option. If the Device Manager fails to perform this, you need to solve this manually.
You can do this by searching on the Internet the version you require. You can always use any specific software in order to update the driver in a single click.
If you encounter Windows Live Mail error, it signifies that the Windows account is having certain problems and requires immediate change. In this case, you might think of another account and then go ahead running the mail agent. If this workaround is effective, you should use the new account.
The worst part of the story is the root cause of the problem which lies with the computer. If the Windows Live Mail account is compatible with another system, you should undergo thorough checkup of the system. This can also take place from the non-optimal settings or there may be accumulated junk of corrupted files.
If you use any suitable software, it can be of great help in this regard. With the help of proper tools, you can optimize the performance of the PC and make other apps or programs run in an effective fashion.
This section will tell you how to fix Windows Live Mail error ID 0x800ccc0f through the registry files. If the above workarounds are not effective, then there might be a problem in the registry.
It might contain unauthenticated keys or corrupted entries that can hamper your system, thereby, leading to this disgusting error. Therefore, to counteract this issue you have to repair the registry thereby eliminating the mail client problem.
You can do so using any specific Registry Cleaner.
To wrap up this discussion, we must say that all the effective hacks pertaining to Windows Live Mail error 0x800ccc0f are mentioned in this informative guide. Therefore, if you follow each and every step thoroughly, you can surely be able to fix this issue in no time.
Moreover, you can refer to the user manual for a quick glance. Apart from this, you can feed your comment in the comment section.
Many users are experiencing a strange issue while signing into Skype accounts from their devices. It makes the sign-in process automatic and hence, you will start receiving Skype calls and message right after the device startup.
Sometimes, this feature can sound amazing to those customers who utilize Skype on a regular basis. But, this Skype login process can be an annoying issue for many, who don’t prefer automatic settings for signing in.
So, if you are facing this problem and want effective methods on how to stop Skype from starting automatically, go through this article. Here, you will get step-by-step guidance on preventing Skype from running during the Windows startup process.
If you are using a Windows-based PC or laptop, running Skype after startup is an automatic process. This is a default selection on most Windows models that allows the user to log into their Skype account as soon as they start their devices.
Fortunately, you can resolve this issue by removing Skype application from the list of startup programs. So, let’s discuss a few techniques that can stop Skype from running in the background.
This method is applicable to those who are experiencing the automatic launch of Skype during OS boot up process. However, you can also apply the instructions if you are annoyed with the Skype shortcut in device’s Startup folder.
In order to apply this, at first, launch the Skype application on your PC and access your account. Then hit the Options menu which you can find beside your profile picture at the top of the window. You can easily identify this option that is visible in the form of three dots in a horizontal position (…).
As you click on this icon, it will show you various options regarding the Skype settings on your machine. So, select the ‘Application Settings’ option and go to the ‘Startup and Close’ section.
Below this option, find the toggle switch for ‘Automatically start Skype’ and disable it. Finally, exit the application window of ‘Skype’ and reboot your PC for these changes to take effect. Hopefully, you will not experience the problem of automatic Skype launching during the startup process.
Usually, the computer has the default feature of adding up the programs and apps in its startup folder. This enables the OS to launch the applications faster after starting up. So, to know how to stop Skype from starting automatically Windows 10, try to remove the app from the Startup list.
To apply this method on Windows 8, 8.1 and Windows 10, launch the Task Manager. You can do this by pressing the tabs for Ctrl, Alt and Delete simultaneously and wait for the Task Manager window.
Next, hit the ‘Startup’ tab and it will display the items that are installed on Windows that appears during the Startup process. From this list, you need to navigate to the Skype application and right-click on it. Then select the ‘Disable’ option and exit the ‘Task Manager’ window.
However, the method of removing Skype from the Startup folder in older versions of Windows is a bit different. Here, you have to click on the Windows Start button and type ‘run’ in the search box. Otherwise, hit the tabs for Windows logo and R at the same time to open the Run dialog box.
Now, write ‘msconfig’ in the text field and then click on the ‘OK’ button. As the ‘System Configuration’ window appears on your screen, select the ‘Startup’ tab. Then you will see the list of startup items on your version of Windows along with checkboxes beside them. So, locate the Skype app and untick the checkbox next to it. This will prevent this application from running during Windows startup.
Finally, press the ‘Apply’ and ‘OK’ buttons and press the ‘Restart’ button on the next dialog window. Once your device boots up, observe whether Windows starts Skype app automatically after login.
If there is any other associated component of Skype installed on your system, repeat the above steps to disable them as well. Now, check whether the Skype app is launching during startup automatically. If the issue persists, try the other methods to block Skype from running in the background during Startup.
In case, you can’t disable the Skype application from launching during the startup, try this method. Here, you need to access the Registry Editor window and delete the entries of Skype.
If you want to try this technique, launch the Run dialog box on Windows and write ‘regedit’ in the text field. Then hit the ‘Enter’ tab and Windows will display the Registry Editor on your device’s screen.
On the Windows Registry Editor window, go through the list of directories on the left pane. Then follow the path link HKEYLOCALMACHINE > SOFTWARE> Microsoft> Windows > CurrentVersion.
Next, locate the ‘Run’ folder below the option of CurrentVersion key on Windows. As you click on it, the Registry Editor will display the list of startup programs on the right pane. So, select the Skype program and right-click on it. Then hit the ‘Delete’ option and Windows will erase it from its startup list.
If Windows asks for any additional confirmation to perform this action, you need to confirm it. Hence, click on ‘OK’, ‘Yes’ or corresponding option on the dialog box for disabling Skype from Windows startup.
Now, you can close the ‘Registry Editor’ window and reboot your PC. Hopefully, you won’t see that Windows is running Skype automatically during the process of startup.
To stop the Skype Preview application to launch during the Windows 10 startup, you need to follow this method.
First, click on the Windows Start menu and run the Skype Preview app. For this, you can either locate the shortcut of this application on Desktop or take help from Cortana search box.
Then check the bottom-left corner of your Skype Preview app and select your profile icon. Now, choose the ‘Sign out’ option from the list of items. This will prevent Windows from logging into your Skype account automatically after startup.
This method is for the users who are facing automatic Skype launch with the traditional desktop version of this app. So, to prevent this application from running in Windows background consistently, you can apply the following steps.
So, start with launching the traditional Skype Desktop app on your Windows. Then click on the ‘Tools’ tab and select ‘Options’ from the drop-down menu.
Next, hit the ‘General settings’ option and untick the checkbox for ‘Start Skype when I start Windows’. Now, save these changes by clicking on the ‘Save’ button and Skype will never launch automatically with the system startup.
To disable the Skype Desktop app from running in the background on Windows, you can apply a small trick. Simply locate the Skype icon on your Taskbar’s notification area. Then right-click on it and choose the ‘Quit’ option from the list of items.
If you are unable to stop Skype application by following this tip or any of the above methods, it’s time to call the experts. Hence, get in touch with a certified technician and ask how to stop Skype from starting automatically, they will surely find an apt solution to solve this issue.
The error 0x8024200d is one of the numerous Windows update errors which the users encounter frequently. The Windows Update errors are of different kinds. Some tend to halt the process of update halfway through the session. While some tend to crash on the users’ input of initiating the update.
That is the reason that plenty of different error codes exist solely to indicate the problem in Windows Update. This particular error is the one that flashes before the users while the system performs a Windows update.
This error makes the users anxious and seeks immediate fixes to troubleshoot the problem. You can directly skip to the solution without giving a basic read to know what the error denotes. Now, doing that would simply delay the troubleshooting process since you’d be ending up performing plenty of mistakes as well.
However, the next section leads you the basics of the error and the potential causes which can lead up to the complication.
The code denotes, as from our discussion in the earlier section, is associated with the Windows Update. The system manifests this error message before the readers when the system fails to process the update session. This issue is simply annoying since it hinders, at times, the functioning of other applications as well.
Now, it can happen due to plenty of reasons. The presence of missing or corrupted files is one of them. If this is the case, a reinstallation can troubleshoot it. Moreover, the outdated driver can also be responsible for this issue and make the users anxious and perplexed. Also, the presence of malware can trigger this problem.
However, the next section holds the essential procedures required to treat the complaint of the users stating that Windows failed to install the update with error 0x8024200d with convenience. And if you seek solutions, stick to the underlying procedure and implement them with care.
In order to treat this annoying error, the users tend to immediately seek help. But, this article makes sure that the users know the fundamentals before heading to the solutions. So, the users now are well aware of the particular error code’s indications as well as the causes which can lead up to the error.
However, makes an attempt with the underlying methods in order to troubleshoot the annoying error completely.
This is one of the most effective ones that we have listed. Running this scan tends to locate the missing files and then substitute them. We will show you the process to employ the Administrator’s mode in order to run the SFC scan. Therefore, read the underlying procedure.
Doing this can locate the faulty files and troubleshoot them successfully. After this, you can resume or retry the update session once again.
The common complaint of the users who state that Windows failed to install the update with error 0x8024200d is very annoying and this procedure is sure to treat it properly. But, if nothing comes up, make sure to head to the successive method. However, if you desire to consult a technical professional to treat the problem, you can feel free to do that.
Their expert guidance solves it at one go.
Windows systems arrive with plenty of integrated tools for troubleshooting which are beneficial and convenient for the non-tech savvy users. Therefore, we have added this tool to our list of effective methods.
This induces the Troubleshooter to resolve the issue so that you can resume with the earlier seamless functions of the system. Restart the system and make an attempt to initiate the Windows update. Most probably, the issue is sure to go away.
However, if it doesn’t, the next procedure is ready to fight it off. Moreover, if you desire to employ the help of a technical expert, you can very well do it.
If the problem lingers, you must restart the Windows update service in order to resolve this issue.
Finally, inspect the Windows update in order to check if you can initiate the Windows Update or not. The next method is what you can try if this fails to yield desirable results.
If you have read the section where we have discussed the reasons for this error to manifest, you’ll know the significance of this procedure. At times, some files tend to go missing or becomes faulty. It is the presence of such corrupted files which induces annoying malfunctions and their resultant issues.
Moreover, the faulty files require serious fixing so that you can resume the earlier workflow. For this, you must follow the underlying steps correctly.
Windows tends to download the files which would substitute the faulty with the fresh ones. Now, this would solve the frustrating error completely.
The procedures are very effective in attending to your complaints which you state saying that Windows failed to install the updates with error 0x8024200d. And if you adhere to each step with care and caution, you can easily troubleshoot the issue. We encourage the users to make attempts to attend to it on their own with the guidance of the above-mentioned methods.
However, if the problem persists and refuses to go away, you must employ the expert assistance of a technical professional. They tend to treat the problem and serve you with the solutions in a hassle-free manner. In this way, you can solve the issue completely and comprehensively preventing the situation to arise once again.
While updating Windows 10, several users are getting an error code 0x80072ee7. When this frustrating error occurs, the users can encounter an error message showing “the server stumbled.”
In case, you are using a wrong DNS server address, you can face this error. Besides that, you can also get this error with your device if you don’t have certain registry permissions. Problematic or buggy software can also be a reason to encounter this error.
If you are also facing this error, and want to fix it, then you have incidentally dropped on the right page. This article contains more than one effective methods with the help of which you can fix this bug on your own.
Here are more than one method, using which, you will be able to resolve this particular error on your own. You can choose the one whichever looks convenient to you.
As per some users, you can also change the DNS server address in order to fix this particular error. So, you can try out this workaround using the steps mentioned below:
Windows 10 contains a built-in error checking tool, which is known as SFC scan. This tool scans your computer and locates the possible problems to fix them. Here are the steps which you can use to perform this action:
If all of the previous methods fail to fix this bug, you can change the registry permissions to resolve this error. In order to change certain registry permissions, try to follow these steps:
You can also be sure about that, the Windows Update and DNS Client Services Are Running. To perform so, try out these steps:
Once you are done with the steps, you need to check if this error has been resolved or not. In some cases, you need to restart your PC to apply the changes.
You can also uninstall the glitched software due to which you are getting this particular error. On that note, let’s perform these steps:
This time you will be able to troubleshoot this error.
Here are some expert provided hacks using which you will be able to resolve the error code 0x80072ee7 on your own. For these reasons, if you have any further queries, you can inform us via your reliable comments. In case, you need any expert’s advice you can also directly contact an expert for further guidance. On that note, let’s conclude this post here and will see you in the next one. Till then stay glued with our website.
Windows 10 Operating System comes with a lot of features but it is not free from the occasional glitches. Users commonly encounter Windows 10 taskbar is not working issue while upgrading the Windows Operating System. Some of them have also reported that the taskbar icon has disappeared and if appeared then fail to use anything from the taskbar as well.
Microsoft is throwing update frequently that is why this error is common for all Windows 10 users. Therefore, if you are encountering the same, then no need to worry anymore. Here we have listed some important techniques to solve the problem instantly. Therefore, go through the upcoming section and apply them accordingly.
As this error is very common, there are lots of ways to fix it. This is why we have mentioned a few of the trusted hacks that will help you remove the error on the go. Now, keep reading this post and apply them accordingly to get fruitful results.
The first thing that you need to try is to restart the Windows Explorer. This will restore the functionality of the taskbar and another interface as well. Therefore, follow the steps that are mentioned in the section below.
At first, press the Ctrl + Shift + Esc keys at the same time to open the Task Manager option. In this section find out the Windows Explorer option and right-click on it.
After that, select End Task option and close the Task Manager section. This task will open again automatically after a couple of minutes. If you found that everything is fine with the taskbar after restarting the Windows Explorer, then your problem might get resolved.
But this is not a permanent solution. Hence, follow the upcoming section in order to solve the error permanently.
Some of the users stated that the problem might get fixed after starting the application identity service. So, just try once this process in order to fix the issue. Hence, follow the steps that are discussed below.
At the beginning of the process, press the Start button and then type “services.msc”. Now, hit the Enter button to open up the Services section. After that, locate the Application Identity option.
Next, right click on the Application Identity option. A drop-down menu will appear on the system screen. Select the Start option from the list.
After completing the process, if you want to restart the system, you can. Lastly, check whether the problem gets fixed or not.
There is an in-built tool present in the Windows which is DISM or Deployment Image Servicing and Management tool. This tool helps you to scan your device and resolve the corrupted files that are present on your PC. To run this tool, you can also follow the section below.
At first, press the Windows and R keys at the same time to launch the Run dialog box. Then, type “cmd” in the run box and hit the Enter button. Soon a Command Prompt box will appear on the system screen. Then, right-click on it to run it as an Administration.
Now, in the command box, type the following command and hit the Enter button to execute the command.
DISM.exe /Online /Cleanup-image /Restorehealth
If the DISM cannot obtain the online files, then you can also use the installation CD or DVD.
Insert the CD or DVD, then type the command mentioned in the section below.
DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:RepairSourceWindows /LimitAccess
Hence, you need to ensure that you replace the ”C: RepairSourceWindows” path of the CD or DVD.
The process would take a few minutes to complete. Hence, wait until the process gets completed. After that, check whether the error message still appears or not. Otherwise, move to the next section.
If the above solutions did not work out for you, then try some advanced solutions to fix this issue. Performing a Windows PowerShell fix will at times help you to resolve the error on thr go. Hence, if you are not aware of this environment, then you might also need some external help. Therefore, perform the steps that are discussed below.
At first, press the Windows key and right-click on the Start menu. Next, select Command Prompt and run it as Administrator. Now, in the command box, type PowerShell and hit the Enter button.
Thereafter, in the Windows PowerShell, paste the following command and hit the Enter button.
“Get-AppXPackage -AllUsers | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register “$($_.InstallLocation)AppXManifest.xml”}”
Afterward, exit from the Windows PowerShell window and move to the following folder
“C:/Users/your_username/AppData/Local/” and locate TileDataLayer and delete it.
Now, check whether the taskbar is working properly or not in your Windows 10 device.
Another method that you can try is to re-register Cortana and ShellExperienceHost. But make sure to apply this only when you do not want to uninstall the application. Hence, follow the steps that are mentioned in the section below.
Press the Start button and type “cmd” in the search bar. Then, press the Enter button to open up the Command Prompt window. Now, enter the following command in the command box and hit the Enter button.
First command: Get-AppxPackage Microsoft.Windows.ShellExperienceHost | foreach {Add-AppxPackage -register “$($_.InstallLocation)appxmanifest.xml” -DisableDevelopmentMode}
Second command: Get-AppxPackage Microsoft.Windows.Cortana | foreach {Add-AppxPackage -register “$($_.InstallLocation)appxmanifest.xml” -DisableDevelopmentMode}
Wait until the process gets completed. After that, check if the problem still persists or not.
If the system that you are using is running an older version then you will get this error. Hence, you need to update the OS in order to fix the issue.
It is recommended that always keep the OS updated. It will help you to fix the issue and improve the performance of the system.
You can also check whether an updated version is manually available or not. Hence, to do that, go through the following section and apply them accordingly.
At first, press the Windows key and I key at the same time to open up the Setting section. Now, move to the Update and Security section.
In the Update and Security section, you will find Check for updates option. It will automatically show up whether an updated version of the OS is available or not. If yes then download the latest version and install it on your device.
After completing the process, restart the system and check whether the taskbar is running properly or not.
You can use the troubleshooter tool in order to fix the Windows 10 start menu and taskbar not working issue. To perform the action, follow the steps.
At first, go to the Settings section and then move to the Update and Security section. From that section, select Troubleshoot option which is located in the left panel of the system screen.
Now, from the right side of the screen, select Windows Store apps and click on the Run the Troubleshooter option. Now, it will detect whether there is any problem with the Windows apps and delete them.
Lastly, check whether the problem still exists or not.
Hope, at least one solution from the above-mentioned methods will definitely help you to resolve Windows 10 taskbar is not working properly. In case, if you have any queries, comments or any solutions for this problem, simply post them on the comment section below.
Some of the methods might require some technical knowledge. Hence, if you are not a tech-savvy person then it might be difficult for you. Hence, you need to very careful while applying them. Else, you can opt for experts help.
“Windows can’t communicate with the device or resource (primary DNS server)” is an error message which the users might get after running a troubleshoot when you can’t connect with the internet using your computer. If this is the case, you are worried about and looking for the exact solutions, then you have come to the right article.
This article will match your query by providing you the useful solutions to the problem. It is advised to read this article thoroughly and till the end before using them to get the perfect and complete knowledge of the steps.
Here, from this article, you are going to learn the effective methods to resolve the Windows failing to communicate with the device or resource issue. So, let’s start.
According to the few users, they got the Windows can’t communicate with the device or resource fix by updating the network drivers. The steps you have to follow to update your network drivers are as explained below.
To update the network drivers connecting with the internet is an essential requirement. But if you are not able to connect your system with the internet, you need to download the required network driver update with the help of another device which works normally.
Once you have successfully downloaded the driver in another device transfer that to your PC which shows Windows unable to communicate with the device or resource error message while troubleshooting this internet glitch. Go through each step to learn the full procedure to update your network driver during the problematic condition of your system.
The foremost task that you need to perform as said earlier to update network driver is to take the help of another device to download the update network driver. For this purpose, at first, you need to open a browser on the other device. And then, go to the network manufacturing website using the browser. After that, get the updated version network driver which is suitable according to your system configuration in which you have got the error message.
Once, you get the matching driver according to your PC configuration, download it. Next, transfer the downloaded driver to the error showing PC with the help of a USB storage device. After that, follow the further instructions as explained below.
After transferring the update network driver to your PC, proceed with the further instructions to solve the Windows can’t communicate with the device or resource issue.
In case, after updating your network device driver, if still, the error exists, try the further method.
Sometimes, due to the inappropriate network properties settings, the Windows can’t communicate error occurs. If this is the case, then to solve the error, you need to follow some simple steps as explained below.
The primary steps to follow to ensure the correct network properties settings are listed below:
The secondary steps that you need to follow to ensure the correct network properties settings. These steps are cited below:
The end steps to ensure the correct network properties settings are described below:
Hopefully, next time when you are going to connect to the internet, you will not get the Windows can’t communicate error message window on the screen.
All these are the complete methods by the application of which you can fix the Windows can’t communicate with the device or resource error efficiently. If you fail to troubleshoot this issue on your own, then you can contact a professional to get the issue resolved.
“Faulty hardware corrupted page” is one such nightmare that can happen with the Windows 10 users. This issue basically occurs when the users are going to turn their devices on. Thus, if you face the same issue, you are not alone.
Due to faulty hardware, this problem occurs the most. Thus, it is recommended that if you just installed the hardware, remove it from your device and check if you face the issue or not.
Apart from that, faulty drivers, virus or malware attack, outdated drivers are equally responsible for getting the same problem with your device.
If you are searching for the perfect tricks to wipe the issue out, then this article will be readily beneficial for you. So, go through the entire article and follow the methods carefully.
As we have come to know that there are various reasons that are responsible for getting this issue, here you can find some troubleshooting methods that are really helpful for you. So, follow each and every method carefully and don’t make any mistake as well.
Fast startup is one of the main culprits that can cause the “faulty hardware corrupted page” issue. If you disable this option, it is often seen to solve the problem. Follow the steps to do so:
First of all, you have to turn on your computer and move to the Start option.
Now, restart your system in Safe Mode.
After that, you have to navigate the system tray and tap on the option “Control Panel” in the search box.
For once more time you have to choose “Control Panel” in the pop-up notification.
Choose the Power option by tapping on it and then, select “Choose what the power button does”.
After that, choose the option “Change settings that are currently unavailable” by hitting on it.
Finally, uncheck the option “Turn on Fast Startup” located under the “Shutdown Settings” tab.
Choose the “Save Changes” option and apply the changes as well.
If the hardware memory and system files get corrupted then there is a big possibility of getting the same issue on your device. On such occasions, you have to perform an SFC scan and also check the RAM to get rid of the issue.
The very first thing you have to do is to tap on the Windows logo key and “R” at the same time from your keyboard. Now, navigate to the search box and type “mdsched.exe” in it.
After that, tap on Restart now and check for problems if your device detects so. Your device will restart automatically.
Keep waiting for a couple of minutes until the scanning process is going on. It can take almost fifteen to twenty minutes to complete the entire process.
Now, you `have to tap on the Windows and X key at the same time on your keyboard. Choose Command Prompt and type sfc /scannow in the box. At the final step hit on the Enter button for once more. Now, check if the same issue is still occurring or has already been fixed.
If you have the “stop code faulty hardware corrupted page” issue with your device, then it is possible that there can be some defects in the Secondary Output feature. If you have mistakenly turned on the feature or by default if the feature is enabled, then it will lead the same issue and makes you puzzled as well. On such occasions, you have to switch off the feature and get escape from this issue. Take a look at the steps below:
First of all, switch on your device and tap the Windows and the “X” key at the same time from your keyboard.
Select the Device Manager and navigate the Display Adapter section from the list of search results.
Now, you have to extend the section and tap on View from the top of the lists.
Next, choose the Show Hidden Devices option by clicking on it. You can find this option at the very bottom of the list and click on that.
At the last step, tap on the Secondary Output option from the left pane of the display.
Finally, right-click on that and choose the Disable icon from the list of the search results.
Verify if you are still getting the same or not.
When all the above methods failed to solve the issue follow this one.
First, you need to press the Windows key and press “R” simultaneously on your keyboard to open the Command Prompt.
Now, type “mdsched” in the box and press the Enter key.
After that, tap on Restart now and review for problems as well.
By this process, the Windows will start testing automatically. As well as you will be able to see the errors on the screen. When the entire process gets completed restart your device and checks if the issue still annoying you or not. Also, by this method, you can decide if you need to change the RAM or not
All the methods we mentioned in this guide are time-saving and proven. So, we expect that you can completely get rid of the “Faulty hardware corrupted page” issue by executing the methods. But by chance, if the above method doesn’t aid you to fix the problem then it is better for you to get in touch with an expert for further assistance.