If you get the “AP mode not supported” error from Connectify Hotspot in your windows 10, that usually means your wireless adapter does not support Hosted Network. Actually, Connectify Hotspot is a software app which assists you to turn your Windows PC or Laptop device into a virtual router and share an Internet connection with all your devices. Thus, it uses the Windows networking features to create it easier for you. Whereas, Hosted Network is a Microsoft Windows feature that is used by Connectify to create access point mode Hotspots. Make sure that Connectify is the only Windows hotspot software to support the Microsoft Surface tablets. If you are running Windows 10, Connectify can create a hotspot using a Surface tablet by using Wi-Fi direct. However, often “Hosted network” adapter does not support AP mode and not work with Connectify Hotspot, as a result you get the error. Then don’t worry about it. Here, the blog will describe you very easy solutions to Fix the “AP Mode Not Supported” Error. So just follow the troubleshooting steps to resolve “WI-FI Adapter Does Not Support AP Mode Error Permanently: Connectify Hotspot”.
Solutions to Fix the “AP Mode Not Supported” Error:-
In the occasion that your adapter does not support AP mode, then there are some possible solutions to fix it.
Solution 1:- Check For Driver Updates
You should do to check for driver updates. Many times checking for driver updates may include support for Hosted Networks (or AP mode). You can verify for driver updates by either visiting the computer manufacturer’s website or the wireless adapter manufacturer’s website. After updating your wireless driver check your driver information again.
Solution 2:- Add a USB Dongle to the Computer
You can add a USB dongle to the computer. In the occasion updating your wireless driver did not assist then you will require purchasing a USB WI-FI Dongle that supports WPA2. Majority of USB wireless dongles today support Hosted Network so any one of your choices should be fine.
Related Blog : How to Fix DNS Server Not Responding Error In Windows 10?
Solution 3:- Choose Roll Back Driver
- Go to “Device Manager”.
- Go to “Network Adaptors”.
- Go to your WIFI Adaptor
- Open Its PROPERTIES.
- Go To “Driver” and Click “ROLL Back Driver”.
- You are done. Now enjoy Connectivity.
In case, if you are facing the same problems again, after performing the above troubleshooting solutions, then you should contact with Windows tech support team to get instant help.
Dial Windows Customer Support Phone Number To Avail Online Help:-
You can dial Windows 10 Support Number +1-855-971-1879 anytime and make an instant connection with the Windows Customer support team. The talented and experienced techies will deliver you the comprehensive guide to fix this issue. Also, you can take easy, swift and reliable solutions to fix other kinds of Windows 10,7, 8 related technical errors or problems. Hence, dial a toll-free number, which obtainable 24×7/365 days and connect with experts now to get hasty solutions and further help for Windows 10 queries.