Monthly Archives: November 2017

28Nov/17
Permanently Disable Windows Defender Antivirus on Windows 10

How to Permanently Disable Windows Defender Antivirus on Windows 10?

Windows Defender is the default antivirus solution for Windows 10 just like it has been on Windows 8. The antivirus helps to protect your device and data against malware, including viruses, spyware ransomware, rootkits, and other types of malicious programs. However, there are still some cases where some users may prefer not to use Windows Defender Antivirus, due to some issue in the devices or network connection issue. The users require to permanently Disable Windows Defender Antivirus on Windows 10, which often they face issue to do this.  So, if you are one of those users who wish to do the same thing, but you are facing some technical issue, then don’t worry about it. Here, the blog will guide you on How to Permanently Disable Windows Defender Antivirus on Windows 10? Then just follow the steps to solve this problem.

Disable Windows Defender Antivirus on Windows 10

Methods of Permanently Disable Windows Defender Antivirus on Windows 10:-

Here are defined few ways to permanently disable Windows Defender Antivirus on Windows 10, so walk through the steps to solve the issue easily.

Method 1:- Using Group Policy To Permanently Disable Windows Defender Antivirus

  • Press “Windows key + R” key together to open the Run command.
  • Type “gpedit.msc” and click “OK” button to open the “Local Group Policy Editor”.
  • Browse the following path:
    Computer Configuration > Administrative Templates > Windows Components > Windows Defender Antivirus
  • On the right side, double-click on the “Turn off Windows Defender Antivirus policy”. Select the “Enabled” option. Click “Apply”, and then “OK” button.
  • Browse the following path:
    “Computer Configuration”, then “Administrative Templates”, then “Windows Components”, then “Windows Defender Antivirus”, and then “Real-time Protection”.
  • On the right side, double-click the “Turn on behavior monitoring” policy.
  • Select the “Disabled” option. Hit “Apply” button.
  • Click “OK” button.
  • On “Real-time Protection,” double-click on the “Monitor file and program activity on your computer” policy.
  • Select the “Disabled” option. Click “Apply”, and then “OK” button.
  • On “Real-time Protection,” double-click the “Turn on process scanning whenever real-time protection is enabled” policy. Choose the “Disabled” option. Click “Apply”, and then “OK” button.
  • On “Real-time Protection,” double-click the “Turn on behavior monitoring policy”.
  • Then select the “Disabled” option. Click “Apply”, and the “OK” button.
  • Restart your computer.

Once you have completed the steps, Windows Defender Antivirus will no longer scan and detect malware on your device, even after restarting your computer.

Method 2:- Using Registry Disable Windows Defender Antivirus

The “Local Group Policy Editor” is not available on Windows 10 Home, but you can still achieve the same results changing the Registry settings.

Follow the steps to disable Windows Defender Antivirus:-

  • Use the “Windows key + R” keys together to open the Run command. Type the command “regedit”, and then hit “OK” to open the Registry.
  • Then browse the following path:
    HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender
  • Then, right click on the “Windows Defender (folder”) key, select “New” and click on “DWORD (32-bit)” Value.
  • Enter the name the key “DisableAntiSpyware “and hit “Enter’ key.
  • Double-click the newly created key and set the value from 0 to 1. Hit “OK” button.
  • Right-click on the “Windows Defender (folder)” key, then choose “New” key and then hit on “Key”.
  • Enter the name of the key “Real-Time Protection” and then press “Enter” key.
  • Next, right-click on the “Real-Time Protection (folder)” key, select “New” and then hit on DWORD (32-bit) Value”. Name the key “DisableBehaviorMonitoring” and press “Enter”. Double-click the newly created key and set the value from 0 to 1.
  • Then hit “OK” key.
  • Then right-click on the “Real-Time Protection (folder)” key, select “New” and then hit on “DWORD (32-bit) Value. Name the key “DisableScanOnRealtimeEnable” and press “Enter” key. Double-click the newly created key and set the value from 0 to 1.
  • Click “OK” option.

After completing the steps, simply restart your computer to disable the Windows Defender Antivirus permanently.

Method 3:- Using Security Center Disable Windows Defender Antivirus

  • Open “Windows Defender Security Center” on your Windows 10 commuter.
  • Then hit on “Virus & threat protection” option.
  • Click on the “Virus & threat protection settings” option.
  • Then turn off the “Real-time protection” toggle switch.

After completing the steps, Windows Defender Antivirus will be disabled making it unable to monitor and stop malware from taking over your device. However, this is a temporary solution, ultimately, the antivirus will re-activate automatically after you restart your device.

Related Blog: How To Remove Viruses From Windows 10 PC With The Windows Defender Offline Tool?

Dial Windows Support Number To Get Instant Help:-

Windows Customer

In case, users have any doubt to follow the above steps, so they can dial Windows 10 Technical Support Number +1-855-971-1879  which is available 24×7 days to help. A team of highly experienced and certified are accessible to deliver you the satisfactory and reliable solution in the correct manner. You can discuss you any kind of Windows technical issues or error with the dexterous experts and get the quick response in an error-free manner instantly.

21Nov/17
Find and Fix Memory Leaks in Windows 10

How to Find and Fix Windows Memory Leaks in Windows 10/8/7?

Windows 10/8/7 system users may have encountered unexpected memory leaks associated with system processes, such as ntoskrnl.exe and Runtime Broker, wherein RAM and CPU usage spikes during PC boot up.

A Memory Leak is a misplacement of resource in a computer program due to faulty memory allocation. It generally happens when a RAM location not in use remains unreleased. A memory leak isn’t to be confused with a space leak, which states to a program using more RAM than necessary. A memory leak on a Windows 10/8/7 system is said to have taken place when the memory is just not accessible in spite of not being in use.

However, it is clear that a memory leak is bad because it is a bug, a flaw in the system, and it affects the system. But, you don’t worry about it, as it’s explained by the Windows Technical Support Team, the issue could be easily fixed by just applying Microsoft tools to diagnose memory leaks or Monitoring habits, etc. Therefore, here the blog will explain simple steps to Find and Find and Fix Windows Memory Leaks. Then follow the steps to fix this problem quickly.

Solutions to Find and Find and Fix Windows Memory Leaks in Windows 10/8/7:-

Here are defined various ways to prevent or stop memory leaks, so follow these solutions now.

Solution 1:- Close Processes and Restart PC

When you see an unnecessary process is taking up too much RAM, then you should manually end the process in the “Task Manager”. Then restart your device so that the freed space is available for use by other processes. This solution may help you to resolve the Restart memory leak” issue and assist to prevent from the bugs and slow down PC issue.

Solution 2:- Use Memory Diagnostic Tools To Resolve Problem

You should try to diagnostic process via using “Tools”, to solve the issue.

Follow These Steps to Access the Inbuilt Memory Diagnostic Tool for Windows:-

  • On your computer, press “Win + R” key together to open the “Run” window.
  • Then you need to type the command “mdsched.exe” in the “Run” window.
  • Restart the PC.
  • After a restart, perform a basic scan or go for the “Advanced” options like ‘Test mix’ or ‘Pass count’.
  • Press “F10” key to start the test.

Check the error is resolved, if not, then go to the next solution.

Solution 3: – Check for Driver Updates & Updating Outdated or Faulty Drivers

You should try to update Driver Software because outdated drivers reason memory leaks. Then you must keep all drivers updated.

Follow these steps to Check for Driver Updates:-

  • On your computer, press “Win + R” key together to open the “Run” window.
  • Then you need to type the command “devmgmt.msc” in the “Run” window, and then press “Enter” key.
  • Then it will take you to the “Device Manager”.
  • You can check for outdated drivers and update them all.
  • For updates you might need help with the tech support experts, then ring at $$$$$$$ for help.
Fix Memory Leaks in Windows 10

Solution 4:-Check for Malware

You should try to use a third-party antivirus software or Windows 10’s in-house Windows Defender to scan and eliminate malware. Ensure the antivirus is updated to support your OS so that it does not end up becoming the reason for the memory leak.

Every solution you might ever essential to find or prevent memory leaks is right here.

Solution 5:- Optimize Performance

Adjusting Windows for performance will manage everything including processor scheduling and memory usage to stop memory leaks.

Follow these steps:

  • First of all, right-click on your PC, and then choose “Advanced” settings in the left pane.
  • Underneath the “Advanced” tab, then go to “Performance”, followed by “‘Settings”.
  • Check “Adjust for best performance” and then click “OK”.
  • Restart and check if the issue is solved.
  • If this simple solution did not work, try the next solution.

Solution 6:- Disable Runtime Broker to fix high CPU and memory usage

Runtime Broker is one system process which often consumes a large portion of CPU cycles, due to its poor memory optimization. However, it can be disabled as follows:-

  • Go to Start menu.
  • Then go to the Settings app and then open System.
  • Choose “Notifications & Actions”.
  • Next, deselect the option “Show me tips about Windows” and reboot the computer.
  • Then memory leak and high CPU usage issues should now be resolved on your PC running Windows 10.

Solution 7:- Defrag Hard Drive

Although Windows 10 does this for you automatically, you may need to do defrag the hard drives occasionally to optimize performance.

Follow these steps to do this task:-

  • Go to “My Computer”.
  • Right-click on the system hard drive (usually C: drive).
  • Go to “Tools” underneath “Properties” and then choose “Optimize” option.
  • Choose the drive to defrag and select “Analyze”.
  • Restart your computer after the new fragmentation.

Hopeful, your issue is fixed.

Related Blog: How to fix code 28 error in windows installation?

In case, the issue still persists, then you should contact the Windows customer support team in order to get the comprehensive guide.

Call On Windows 10 Support Phone Number Now To Connect with Experts:-

Windows Customer

You can dial Windows 10 Customer Service Number +1-855-971-1879 to make a prompt connection with our Windows Customer Support team. The talented and experienced technician’s works round the clock to your support, as they will give you the comprehensive guide to fix Windows technical problems. It assures you will grab the reliable, efficient and perfect solutions to Windows technical problems or errors with the expert’s help in a less time.  Hence, call on this toll-free number, which is available 24×7 day for your help, and connect with proficient experts now for further Windows queries.

17Nov/17
Fix Windows Error Code 0xc00000e9

How to Fix Windows Error Code 0xc00000e9?

Many numbers of Windows users experience the technical errors or issue while working on their PC and Computer. Windows10 Error Code 0xc00000e9 is one of the most common errors that faced by many numbers of Windows users. The error code means, it leads to a blank screen, most probably comes, when the users are trying to boot their operating system, and it does not permit it to initiate. Also, often it does not allow the users to boot the Windows computer in Normal Mode but works in Safe Mode. The Windows 10 Error Code 0xc00000e9 is caused by different PC components not being able to properly connect to your computer. Some other reasons for the happening to this Fix Windows Error Code 0xc00000e9, includes as misconfigured BIOS/CMOS settings, malfunctioning hardware, or corrupt system files, Faulty or damaged hard disk, Loosely connected hard disk, Faulty USB or DVD that you use as your installation device, Windows updates, Misconfigured or corrupt registry files, virus problem, and Outdated PC drivers etc.

Fix Windows 10 Error Code 0xc00000e9| Simple Troubleshooting Hacks

The Microsoft operating system has introduced several updates over the last twenty years. From Microsoft DOS to Windows 10, the operating system has changed radically. However, frequent errors and technical glitches can occur while working on the updated versions of Windows. One of the most common errors is 0xc00000e9. It is difficult for the users to detect the actual cause of such errors. To fix Windows 10 Error Code 0xc00000e9, check out the solutions that we provide. Also, connect with us for further assistance.

What is Error Code 0xc00000e9?

This error occurs when your computer fails to communicate with your hard drive. As a result, your system begins to malfunction. At times, some applications become unresponsive. Encountering these errors are quite troublesome while you are working on your system.

Again, when you install the higher versions of the Windows, the Solid State Drive fails to communicate with the OS. Thus, your system fails to run smoothly.  If you are encountering with this error, do not worry. Check out the given solutions to fix Windows 10 Error Code 0xc00000e9 at once.

Windows_error_code_0xc00000e9

Solutions to Fix Windows 10 Error Code 0xc00000e9:-

Solution 1:- Check Hard Drive Issues

Firstly, you should try to verify your hard drive, means is not having any issue in it, or if have any issues, then immediately fix it, to the proper functioning of your hard drive.

Follow these steps to do the task:-

  • Boot your system through Safe Mode.
  • Then open your computer directory and then right-click on “Drive” section, and then choose “Properties.
  • Go to the “Tool” tab under “Properties” section, and then hit “Check Box” under “Error-Checking”.
  • Next hit on both Check Boxes, “Automatically fix file system errors” and “Scan for and attempt recovery of bad sectors”.
  • Finally, hit the “Start” button.
Solution 2:- Fix Malfunctioning Programs

If you think one of those malfunctioning programs that have mentioned earlier is to blame for your issues, then you will have to do the following process.

Follow these steps to do the task:-

  • When booting your PC, you need to press “F8” key to “Open Advanced Boot Manager”
  • Choose “Safe Mode” as Boot Option.
  • Go to “Control Panel” and then hit on “Uninstall Programs”.
  • Remove the latest installed application, the latest before the error occurred.
Solution 3:- System Restore

If the above solution fails, then you can fix the issue is just by simply go through a “System Restore” process. Then you will first have to find a restore point when your computer was working fine, then you must.

Now check your error code is fixed, if not then go to the next solution.

Solution 4:- Automatic Repair

You should try to perform the Automatic Repair option to solve the error code.

Follow these steps to do the task:-

  • Move the mouse over to the lower right side of the screen.
  • Then you will have the charms bar open.
  • Left click on the “Settings” feature in the Charms bar.
  • Left click on “Change PC settings” feature in the “Settings” menu.
  • You will have to left click on the “Update and Recovery” feature on the left side of the window
  • Left click on the “Recovery” feature.
  • Then you will get “Advanced startup” on the right side of the window.
  • In the “Advanced startup,” feature left-click the “Restart now” button.
  • Now, wait for the Windows 8 or Windows 10 device to reboot.
  • After the reboot, it will take you directly to the “Advanced startup” feature.
  • Now in the “Advanced startup” feature, you will have to select the “Automatic Repair” feature and follow the instructions given on the screen.
  • After the “Automatic Repair” feature is finished then there is a need to need to reboot your Windows 8 or Windows 10 device.
Solution 5:- Perform Other Different methods to fix Procedure to Fix the Error

If you still occurring this error, then you should try to perform some other different methods to fix procedure to fix the Error.

Follow these steps to do the task:-

  • Shutdown Your Windows 8 or Windows 10 device.
  • After the shutdown process is completed have a look at the USB ports on your device and disconnect all USB cables except the two cables; one for your keyboard and the one for the mouse.
  • Start your device as you generally do.
  • Check and see if you still get the error code 0xc00000e9.
  • If the error code does not appear anymore then you will need to plug in one device at a time with respect to the same procedure mentioned above. But, if you observe that after you plugged in the Printer, you get this error code, then you will have to change the USB cable to the printer and also update the driver for the printer in order to support the Windows 8 or Windows 10 operating system.

Check your issue is surely resolved.

Solution 6:- Reinstalling Windows from a CD

The other solution also you can apply to fix this issue is just by reinstalling Windows from a CD.

I hope your issue is fixed.

If you need any doubt to follow the above mentioned steps, then contact Windows Customer service team for immediate assistance.

Related Blog: How to fix Windows update error 80072ee2?

2nd Way To Fix Windows 10 Error Code 0xc00000e9?

Resolving Windows 10 error code 0xc00000e9 is easy. All you need to do is follow the given guidelines properly and carefully.

Check the Auxiliary Connections:

Sometimes, the peripheral connections cause trouble in your system. Check the USB portals carefully.

  • First, you should close all the apps that are running on your system
  • Shutdown the device
  • Next, disconnect all the cables except for keyboards and mouse. If you are using a pendrive, remove it carefully.
  • Start your computer normally
  • Check if the error code is still displaying or not.
  • If the error code is not displaying, plug in the cables one by one.

Update Drivers:

Outdated drivers can trigger the error, so you have to update a few drivers like graphics and audio. Generally, Windows updates hardware drivers automatically. If it fails to function, error codes develop.

in case you have an extra hard drive, connect it with your system and the error will be eliminated.

Fix the Master Boot Record(MBR)
  • Connect your external hard drive with Windows PE
  • Now, set your C drive as MBR
  • Reboot your system
  • Windows will be updated automatically and the problem will be solved.

These are some of the quick ways to fix Windows 10 error code 0xc00000e9 easily. Hope the solutions were helpful to you. In case you find it difficult to fix it on your own, connect with our professionals at Windows Support. Our technicians are available 24*7 to assist you.

Smart tricks and tips to avoid the error code

Try to follow the given tips to avoid technical glitches in the future. Also, these hacks will keep your system sufficiently updated.

  • Make sure to update the drivers frequently.
  • Start using a robust Antivirus software program to remove malware from your system. Antivirus generally scans all your documents to detect the corrupted files.
  • Uninstall the apps which are unnecessary.
  • Maintenance of your system is required.  

Connect with us for more appropriate solutions

Tired of technical issues and Windows error codes? Contact our experts for help. We have a reputation of getting the highest success rates in each of our service calls. Our engineers have worked for years on software technologies. Thus, they have adequate knowledge about the Windows operating system.

Windows Customer

Call us at the Windows Support Number  +1-855-971-1879 and get all the tech help you need. You can even drop a message in our mail id and describe the issue in details. Also, try to attach some screenshots if possible so that our professionals can guide you with a proper solution. We are now available 24*7 on our new and improved chat support feature. We make sure to provide you with quality solutions as soon as possible.

15Nov/17

How to Fix Windows Unexpected Store Exception BSOD?

Microsoft has recently launched the new operating systems, which, undoubtedly gives computer users the opportunity to enjoy and make use of improved features. However, no will ignore the problem that surely comes due to a new operating system. Due to this, a lot of users often come across many tasks in the form of issues or error messages.

New and updated version of Windows offers some advanced features along with enhanced aesthetics. However, it offers some complications with it as well. One of such annoying problems is Unexpected Store Exception. When this error occurs, both your computer and operating system can get corrupted. Further, every time this issue pops up, you have to restart your computer. Frequent recurrences of this problem can be troublesome for you. The moment you encounter this error, avail our expert assistance without delay.

Unexpected Store Exception BSOD on WindowsAmazing Fixes For Unexpected Store Exception|Connect today!

New and updated version of Windows offers some advanced features along with enhanced aesthetics. However, it offers some complications with it as well. One of such annoying problems is Unexpected Store Exception. When this error occurs, both your computer and operating system can get corrupted. Further, every time this issue pops up, you have to restart your computer. Frequent recurrences of this problem can be troublesome for you. The moment you encounter this error, avail our expert assistance without delay.

What This Stop Error Means

This error message comes with the Blue Screen of Death. When you get this BSOD, it means your system met an unexpected crash. Besides, you won’t be able to boot your computer normally in case this stop error occurs. If you are trying to fix this issue, first figure out the reason at first.

Accordingly, a number of factors can be responsible for this Unexpected Store Exception. It can result from damaged or outdated drivers and pending updates. Again, if you are facing this issue after updating the Windows, then your OS might need a repair. Also, it can occur from corrupted files or malware. Finally, you might come across this issue due to errors with your hard disk.

Tips To Fix Unexpected Store Exception

Once you find out the reason why you are encountering this BSOD error, you can try to fix it. Resolving the issue depends on the problem. In case, you are struggling with this problem and having difficulties in figuring out why it’s occurring, get expert help. You can get in touch with us to know about this issue. Our Windows Customer Care team is always eager to resolve your queries.

Method 1: Perform Some Troubleshooting Steps

There are some basic hacks you can try in order to resolve the Unexpected Store Exception error.

  • You can install and launch an antivirus program. Run a full scan and look for the corrupted files responsible for the error. If the issue is occurring due to a virus attack then this method will help you.
  • Junk files are capable of causing BSOD error. Therefore, remove all the junk and unnecessary files from your computer.
  • If the software you are using is not compatible with the operating system then this problem can occur. In that case, you can uninstall third-party software and check whether the issue is resolved or not.
  • Lastly, you can reboot your computer to troubleshoot technical glitches.

Method 2: Update Driver

Drivers are responsible for communication between the system and all installed program. You can come across an unexpected BSOD if your driver needs an update. So, check for the available update first. Navigate to “device manager” and select “update driver” to complete the procedure.

One such error message is the ‘Unexpected_Store_Exception’ error message, which is one of the latest error messages that might face users of Windows OS. Though it’s an unexpected error, the message points to issues relating to the Windows Store. Such issues can be caused by many factors that can be related directly to Windows Store or related to your computer. When this error occurs, most of the time user’s computer can’t boot into Windows 10 as normal. Therefore, some of the possible causes include Damaged/outdated system drivers, Pending updates, corrupt system files, Bad sectors on the hard disk, the installed anti-virus program, Fast startup routine, Antivirus/malware infection, etc. Well, here the blog will illustrate you some easy methods to Fix Windows Unexpected Store Exception BSOD You just require pursuing the methods.

How To Fix Windows Unexpected Store Exception BSOD Error

This error message comes with the Blue Screen of Death. When you get this BSOD, it means your system met an unexpected crash. Besides, you won’t be able to boot your computer normally in case this stop error occurs. If you are trying to fix this issue, first figure out the reason at first.

Accordingly, a number of factors can be responsible for this Unexpected Store Exception. It can result from damaged or outdated drivers and pending updates. Again, if you are facing this issue after updating the Windows, then your OS might need a repair. Also, it can occur from corrupted files or malware. Finally, you might come across this issue due to errors with your hard disk.

Tips To Fix Unexpected Store Exception BSOD on Windows 10/7/8/8.1:-

Once you find out the reason why you are encountering this BSOD error, you can try to fix it. Resolving the issue depends on the problem. In case, you are struggling with this problem and having difficulties in figuring out why it’s occurring, get expert help. You can get in touch with us to know about this issue. Our Windows Customer Care team is always eager to resolve your queries.

Method 1: Perform Some Troubleshooting Steps

There are some basic hacks you can try in order to resolve the Unexpected Store Exception error.

  • You can install and launch an antivirus program. Run a full scan and look for the corrupted files responsible for the error. If the issue is occurring due to a virus attack then this method will help you.
  • Junk files are capable of causing BSOD error. Therefore, remove all the junk and unnecessary files from your computer.
  • If the software you are using is not compatible with the operating system then this problem can occur. In that case, you can uninstall third-party software and check whether the issue is resolved or not.
  • Lastly, you can reboot your computer to troubleshoot technical glitches.
RELATED BLOG: How to Fix Windows Update Error 80244022?

Method 2: Update Driver

Drivers are responsible for communication between the system and all installed program. You can come across an unexpected BSOD if your driver needs an update. So, check for the available update first. Navigate to “device manager” and select “update driver” to complete the procedure.

Alternative Options

You can run a system file checker to eliminate the issue. Also, uninstalling the security software you are using can help as well. Finally, your operating system might need a fix. So, repairing the OS can also help.

Method 3:- Uninstall Antivirus Program

You should know one thing is that Windows 10 OS has Microsoft Defender by default. This is powerful enough security software which permits you to use it without installing any other security software. Remember, uninstalling third-party security software you may have installed, which may be causing file conflicts, leading to the error.

Follow the Steps to Uninstall Antivirus Program:-
  • Hit on the combination of “Win + X” keys to open “Startup” menu.
  • Choose the “Control Panel” section.
  • Then hit on “Programs” in the control panel.
  • Find the third-party security software from the resultant programs list.
  • Then right-click on it before choosing to uninstall.
  • Restart your computer and try launching different programs to see whether your installed Antivirus program was causing Unexpected Store Exception error screen for you.

Follow the steps to do a task:-

  • Right-click on “My Computer” before selecting “Properties”.
  • Then choose “Device Manager” option.
  • Navigate to all the devices listed while looking out for any device with a yellow exclamation mark.
  • Right-click on any such device before choosing “Update Driver”.

Restart your computer after the update and check the error is resolved. If not, then go to the next step.

Method 4:- Run System File Checker

You require running the built-in system file checker tool, which is helpful in resolving the error. The tool will scan your PC and attempts to repair corrupt files that may be the cause of the error.

Follow the steps to do the task:-

  • On your PC, go to “Start” button.
  • Then type “cmd” in the “Search programs and files” box.
  • Press together “CTRL + Shift + Enter” key before clicking “OK” to open a command prompt. OR simply press “Win + X” keys and click on Command Prompt (Admin).
  • Then type “SFC /scannow” and then hit “Enter” key.
  • Wait sometime while the process complete and to check system files and replace them if found corrupted.
  • Once it is finished, then you will be displayed if any files were found corrupted and if they are fixed. Then restart your System. If your System files were corrupt then performing steps should fix “Unexpected_Store_Exception” error for you.

Method 5:- Repair OS

It is important for you to attempt repairing the OS if any of the above methods doesn’t resolve the error. This is as simple as booting your computer from Windows 10 installation media before selecting repair. Ensure that you pursue on-screen instructions to the letter before restarting your computer normally. Automatic Repair will work and view if it can repair errors in your System.

I hope your issue is fixed.

In any case, you have any doubt to follow the above steps, then you should connect with our Windows Tech Support experts to get help.

Dial Windows Customer Support Number ++1-855-971-1879 To Avail the Online Help:-

Windows Customer

Get in touch for trusted support

Windows errors can be complicated and risky. There is a chance of further damage if you try to fix it without taking proper safety measures. Therefore, get in touch with us in case you are struggling with this error. Our experts will provide you with the most reliable solutions at your doorstep. We offer time-bound services at an affordable rate. Give us a call at Windows Technical Support Number +1-855-971-1879 for instant fixes. You can also avail our services by sending us an email or via our live chat support portal. Our communication portals are available 24*7.

13Nov/17
Windows Error Code 0x00000057

How to Fix Windows Error Code 0x00000057?

Windows Error Code 0x00000057 has associated a printer error on Windows which does not permit the user to add the printer. Actually, when users trying to connect a shared printer over a network, often the printer does not exist and the users unable to connect and receives this error Code 0x00000057. The reason could be caused by the occurrence of this error includes as an outdated driver issue, Installed new printer driver, corrupt drivers previously installed and the permission issues, etc.  So, if you are facing the same issue, when you are trying to add the printer it installs and if it doesn’t add the printer because of the corrupted files in the DriverStore. Then you don’t need to worry about it, the error code 0x00000057 is fixed easily, as it’s suggested by the Window tech support team. Well, here the blog will explain you very simple steps to Fix Windows Error Code 0x00000057 Then you just need to follow the below steps to fix the problem quickly.

 

Steps to Fix Windows Error Code 0x00000057:-

Step 1:- Enter Network Location

First of all, open the start menu and in the search bar, enter the network location before you hit the enter key.

Step 2:- Connect to Printer

When the network window will open up, right click on the printer and select the connect option.

Step 3:-View Error

A pop-up window of “Add printer” will appear and it will inform you that “Windows cannot connect to the printer”. Click on the see details and you will see “Operation failed with error 0x00000057”.

Step 4:- Go to Devices and Printers

  • Then properly add the shared printer.
  • Go back to the start menu and then click on “Devices and Printers”.

Step 5:-Add a Printer Button

In the “Devices and Printers” window, click on the “Add a Printer” button at the top.

Related Blog: How to Fix Windows Error Code 43 ?

Step 6:-Create a New Port

  • Then a new window will appear on your screen. There you will see two options; “use an existing port” or “create a new port”.
  • Now you should choose the “Create a new port” option. Click on the Next button to continue.

Step 7:-Enter Network Location

You will then be prompted to provide the ‘Port” name. Enter the “Network location” followed by the shared printer name and then click on the “OK” button.

Step 8:-Select the Printer’s Manufacturer

  • In the next window, select the printer’s manufacturer and its model.
  • Once you are done, click on the “Next” button.

Step 9:- Type a Printer Name

In the next screen, you will be asked to type in the Printer’s name. Once you are done, continue further.

Step 10:- Printer Added Successfully

  • You will be notified that you have successfully added your printer.
  • Then hit on the “Finish” button in order to exit.
  • In this manner, the blue screen of death stop error 0x00000057 will be resolved and your network printer will be successfully added.

In case, you need any further help then you can connect with us anytime to get instant help.

Dial Windows Customer Support Phone Number To Get Instant Help:-

Windows Customer

In case, you need doubt to follow the above steps, then call us at Windows 10 Support Phone Number +1-855-971-1879 and immediately connect with proficient technicians to get help.  A team of talented and experienced are always ready to customers help 24×7 in order to determining any kind of Windows associated technical issues or errors. It assure the highly skilled technicians will provide you the reliable, finest and hasty solutions to your Windows technical difficulties in a less time. Hence, dial this toll-free number and get help for further Windows queries.

11Nov/17
Fix Startup Problems with the Windows Startup Repair Tool

How to Fix Startup Problems with the Windows Startup Repair Tool?

Being able to use the Windows computer, the users need for proper maintenance. Since, many numbers of users have reported that they are getting problems, while they use their Windows computer. Actually, often Windows computer not started properly, due to any causes of PC for problems like missing or damaged system files or even due to hardware issues. So, if you are one of those users, who are getting the exact the same issue, means if your Windows isn’t starting properly, then you should take immediate solution & help. The best solutions is to use recovery tool, which is quite effective & helpful on Windows 7, 8, and 10, as it will help to scan your PC for problems like missing, corrupted or damaged system files. But, it can’t fix hardware issues or Windows installation problems, however, it’s a great first place to start if you are suffering trouble booting into Windows. Well, here the blog will guide you easy methods to Fix Startup Problems with the Windows Startup Repair Tool, then you just need to follow the steps to do it.

 

Methods for Fix ‘Startup Problems with the Windows Startup Repair Tool’:-

As, this Startup Repair tool is obtainable on Windows 7, 8, and 10, so you can access it from the three methods that built-in “Windows recovery tools”, “Recovery media”, or a “Windows installation disc”.

Method 1:- Launch Startup Repair from the Windows Boot Menu Option

Steps to Launch Startup Repair from the Windows Boot Menu:-

For Windows 8 or 10:-

On Windows 8 or 10, you will frequently view the “Advanced boot options menu”, but if Windows can’t boot properly. Then you can access “Startup Repair” tool by hitting “Troubleshoot” option, then “Advanced Options” option, and then choose “Startup Repair” option on this menu.

Now, the Windows will ask you for your password and attempt to automatically repair your PC.

For Windows 7:-

  • On Windows 7, you will frequently see the “Windows Error Recovery” screen, but if Windows can’t boot properly. Then you have to select “Launch Startup Repair (Recommended)” on this screen, in order to run startup repair.
  • Then Windows will prompt you for your keyboard layout and a username and password for your PC. Then choose the “Launch Startup Repair (recommended)” option. Then Windows will attempt to find and fix problems that can avoid your PC from booting.
  • In case, if the Windows 7 won’t boot properly and doesn’t show you the “Error Recovery screen”, then you can get into it manually. Follow these steps to do this task.
  1. First, power the computer completely down.
  2. Then turn it on and keep pressing the ‘F8” key in order to boot.
  3. Now, you will see the “Advanced Boot Options” screen, which is where you would launch “Safe Mode” from.
  4. Then choose “Repair Your Computer” and run startup repair.

Note: – In some situation, the “startup repair” option in Windows 7 may not be available.  Then you always require using a Windows installation disc to repair your computer instead. As defined in the method 2, so you can proceed with the next method.

Method 2:- Launch Startup Repair From Windows Installation Media

Steps to Launch Startup Repair From Windows Installation Media:-

  • First of all, you can need to download a Windows 7, 8, or 10 ISO from Microsoft and either burns it to disc or copy it to a USB drive if you don not have Windows installation media.
  • Make sure use media which matches the version of Windows that you are trying to recover.
  • Then insert the disc or USB drive into the computer which cannot boot properly and boot from the device.
  • On Windows 8 or 10, click the “Repair your computer” option instead of “Install now” on the installer screen. Then select “Troubleshoot” option, then “Startup Repair” to run startup repair.

In this way, this tool will fix every problem. However, reinstalling Windows maybe can damage the Windows, so do it at your own risk, or even reinstalling Windows may not solve your problem. It’s the best suggestion for you to contact our proficient Windows technical support team to solve it quickly.

Method 3:- Launch Startup Repair From a System Repair Disc or Recovery Drive

If Windows is not booting properly and won’t even permit you to use the “startup repair” option at boot, then you can run startup repair from a system repair disc or recovery drive. As you can create a recovery disc on another PC running Windows 7 and use it to fix the problem.

Steps to Launch Startup Repair From a System Repair Disc or Recovery Drive:-

  • First, make sure that Windows 7 only allows you to create a recovery disc by burning a CD or DVD. Windows 8 and 10 allow you to create a USB recovery drive or burn a recovery disc, whichever you prefer.
  • Once you have created a system repair disc or recovery drive, then insert it into the PC which is not booting properly and boot from the disc or USB drive.
  • Then you will be prompted to choose an installed version of Windows and you will see the same tools you could normally access from the boot menu.
  • Choose “Startup Repair” to run a startup repair operation.

Therefore, this recovery media will also permit you to use “System Restore”, recover your computer using a system image backup you have previously created, and run a Windows Memory Diagnostic verify your computer’s RAM for problems.

I hope your problem is fixed.

In case, you have any doubt to follow the above steps, then you can should take immediate help from the Windows Technical Support team.

Call at Windows Customer Phone Number For Instant Help:-

Windows Customer

Dial Windows 10 Support Phone Number +1-855-971-1879  which is accessible 24×7/365 days for your full support & online help. Via number, you can connect with our team of well-experienced and dedicated professionals, who will help to resolve this issue by giving you the comprehensive guidance. In addition, you can take the best possible solutions, hasty and finest steps to fix other kind of complicated or complex Windows technical issues or errors. Hence, get in touch to with our proficient technicians now and rapidly resolve your Windows related queries.

08Nov/17
Fix Windows Failed to start Error

How to Fix Windows Failed to start Error?

There are many different errors that Windows computers show when they fail to boot into their Operating Systems. One of those errors is that the “Windows failed to start” error. Many numbers of users have encountered the Windows failed to start error while working with Windows computers. The error indicates that there the Windows cannot find the System Files used for booting, which point to boot configuration data BCD is missing or corrupted, File system integrity compromised or  System files are corrupted or damaged, etc. So, whatever the reason behind the occurrence of the error, as this issue can be easily solved as its suggested Windows technical support professionals. Thus, if you are facing exactly the same issue that is “Windows Failed to start Error or Windows Error Recovery Problem for Windows Vista, 7, 8, 8.1, then you don’t need to worry at all. Here the blog will guide you some easy methods to Fix Windows Failed to start Error in a quick and easy way. Then you need to just follow the below steps to quickly solve the issue.

Methods to Fix “Windows Failed to start” Error:-

Method 1:- Boot System into Last Known Good Configuration Option

Fix Windows Failed to start Error

First of all, you should try to boot your system into using the “Last Known Good Configuration Option”.

To boot use into the “Last Known Good Configuration” option, follow these steps:-

  • Restart your computer.
  • Then press “F8” key repeatedly while you see the list of boot options.
  • Next, choose “Last Known Good Configuration (Advanced)”.
  • Then press “Enter” key and then wait to boot.

Check the error is resolved, if not, then go to the next method.

Method 2:- Run System Restore from Windows Installation Disc

Sometimes, it viewed that the Windows Failed to start” Error is fixed by just tried the steps to run the “System Restore from Windows Installation Disc”. Make sure this method will only work if you have the installation disc and System Restore enabled on your Windows copy.

To access System Restore, follow these steps:-

  • First, insert the Windows install disc.
  • Then press a key when “Press any key to boot from CD or DVD” message appears on your screen.
  • Hit on “Repair your computer” option after selecting a language, time and keyboard method
  • Now, choose the drive where you installed Windows (usually C:\) and then hit on “Next” button.
  • Choose “System Restore” option from the System Recovery Options window.
  • Follow the “System Restore” wizard instructions to select a restore point
  • Restore your PC by hitting on the “Finish” button.

Check the error is resolved, if not then go to the next method.

Method 3:- Repair your Boot sector or Rebuild BCD Manually

The other solution is to fix the error via Using Bootrec.exe you can rebuild the master boot sector (BCD). This is a tool built in the Windows Recovery Environment (Windows RE) that can repair boot configuration data.

  • Insert your computer’s OS installation media.
  • Then, restart your computer and press any key before the look of the Windows logo.
  • Then choose your preferred language and other options.
  • Hit on “Repair my Computer”.
  • Then choose the installation location, which is normally “C”. Then tap “Next” option.
  • Choose “Command Prompt” at the System Recovery Options.
  • Then you need to type the following command and press “Enter” key afterward:

bootrec /FixMbr
bootrec /FixBoot
bootrec /ScanOs
bootrec /rebuildBcd

Now restart your computer to see error on windows is resolved. If not, then go to the next method.

Related Blog: How To Fix Windows Activation Error code 0xC004C003?

Method 4:- Run chkdsk

If the above didn’t work, then you should try to run the chkdsk process to solve the error.

To Run Chkdsk, Follow These Steps:-

  • Insert your CD, and then restart your computer.
  • Boot into the CD by pressing any key when the “Press any key to boot from CD” message appears on your computer
  • Press “R” key to open the “Recovery Console” in the Options menu
  • Type in your Administrator password
  • Press “Enter” key.
  • In Command Prompt, you need to type the following command:

chkdsk C: /f /x /r

  • Then press “Enter” key.
  • After chkdsk process is completed, restart your computer

Method 5:- Use Windows Recovery Software Tool To Solve Problem

If the error still exists, then you should try to use the best recovery software tool, which will definitely help to fix the “Windows Error Recovery. The Windows failed to start” error automatically via using the built-in Automated Repair option. As you can easily find the recovery software tool for Windows XP, Vista, 7 and 8 and can be downloaded and created on any PC.

Follow the Steps to Do the This Task:-

  • Download the best Windows recovery software tool for surfing the Internet.
  • Then install and Launch the Program.
  • Then Boot up your PC from the Recovery software program file or CD or USB if you created.
  • Once the tool is running, choose the “Automated Repair” option and click “Continue” option.
  • Then scans your computer’s drives, identify and select the drive letter for your Windows installation from the list, and then click on the Automated Repair button to begin.
  • The tool will start analyzing the selected drive for problems and will test for and attempt to automatically correct errors with the disk, partition, bootsector, filesystem, bootloader, and registry. No intervention is required, as repair tool is fully automated:
  • Once the process is complete, the tool will report its findings.
  • Hit “Restart” button to reboot your PC and test the changes.
  • The “Windows Error Recovery. Windows failed to start” error should now be fixed as your PC begins to load.

I hope your issue is fixed.

In case you have any issue to follow the above steps, then contact to our Windows support experts to get immediate help.

Windows Customer Support Phone Number:-

Windows Customer

Call us anytime at dialing Windows 10 Support Phone Number +1-855-971-1879 , which is a toll-free and available 24×7 days to fix your Window problems. We are highly engrossed with rich team of experts, who are skilled, and experienced in resolving Windows technical issues in the fastest way and within a less time. Our team is available all the time, day and night for provides the users, the world class solutions & support for all types of Windows technical issues or errors. Hence, call now us at toll-free and rapidly connect with talented professionals in order to get the right solutions to Windows mishaps.

03Nov/17
Fix Windows Error Code 43

How to Fix Windows Error Code 43 ?

Windows users are very much familiar with the small Windows technical problems while frequently comes while using the Windows system. These issues or errors are usually self-rectifying, but often it could be complicated for users, and not so easily handle as seems. The Error Code 43 error is one of the several Device Manager Error codes. It’s normally generated when the Device Manager stops a hardware device because the hardware reported to Windows that it’s having some kind of unspecified problem. The error simple indicating that there is a true hardware issue or driver problem which Windows isn’t looking as such but that the hardware is being affected. So, if you are facing the same Device Manager Error codes like an Error Code 43, in Windows, then there are surely chances it’s a system error code, which you should not troubleshoot as a Device Manager issue. The error could apply to any hardware device in Device Manager though most Error Code 43 seems on video cards and USB devices like printers, webcams, iPhones/iPods, etc. Then don’t worry about it. Well, here the blog will explain the simple steps to Fix Windows Error Code 43Then you just need to follow the given steps to solve the problem.


Solutions to Fix Error Code 43 in Windows:-

Solution 1:-Restart Your Computer

You should try to restart your computer if you have not done so already. Once you restart your computer, might it will solve Error Code 43 in Windows.

Solution 2:- Install a Device or Make a Change in Device Manager

If you are seeing Error Code 43, then it’s caused by Device Manager or some device problem, then you should try to install a device or make a change in Device Manager.  The change you made, if it’s possible to you, to immediately solve the error.

Depending on the changes you made, some solutions might include:-

  • Removing or reconfiguring the newly installed device.
  • Rolling back the driver to a version prior to your update.
  • Using System Restore to undo recent Device Manager related changes.

Once you changed, then you should restart your PC, and then check again for the Error Code 43 is fixed. If it’s not, then go to the next solution.

Solution 3:-Update the Drivers

You should update the drivers for the device. It’s also very possible that installing the latest drivers for the device could correct the Code 43 error.

Solution 4:- Install the latest Windows Service Pack

You must verify your Windows service pack, is it too older. If yes, then you should try to Windows service pack. One of Microsoft’s service packs or other patches for Windows might contain a fix for whatever might be causing the Code 43 error, so if you’re not fully updated, do so now.

Solution 5:-Update BIOS

If the above solution didn’t work, then you should try to Update BIOS. Sometimes the error code 43 happen due to an outdated BIOS, which could be causing a specific issue with a device that is making its report an issue with Windows.

Solution 6:- Check Connections & Replace the Data Cable

Replace the data cable that connects the device to the computer, assuming it has one. This potential fix for a Code 43 error is most often used if you see the error on an external device like a USB or FireWire device.

Solution 7:- Replace the Hardware

If the above solution didn’t work, then you should try to replace the hardware.  A problem with the hardware might be causing the Error Code 43, in which case replacing the hardware is your next logical step. In most cases, this problem could be fixed by applying the software-based troubleshooting ideas.

I hope your issue is fixed.

For Instantaneous Help Dial Windows Technical Support Phone Number:-

Windows Customer

If you have any problem to follow the above steps, so you can hassle free call on Windows Support Phone Number +1-855-971-1879 , which is a toll-free and available 24×7/365 day for your help. A team of highly skilled and experienced techie’s works with your full help, day and night in order fix Windows technical errors or issues in a less period of time. The proficient technicians will give you awesome guidance to resolve this issue, and other Windows problems.  Hence, call now to experts, for further help to Windows difficulties.