Category Archives: Fix Windows Errors

02Jul/19

Effective Workarounds To Fix The Black Desktop Background Issue Within A Flicker Of Time

Black desktop background error on the Windows 10 is a very common issue which a lot of Windows users have encountered. Moreover, you may face this annoying error due to plenty of reasons.

 After performing some particular number of operations on your Windows 10 Operating System, the screen of the desktop turns black and the wallpaper of the system gets disappeared. Additionally, this error is not a crucial one but still very frustrating at times. However, if you are struggling with this annoying issue on the Windows 10 system and wondering how to fix it, then don’t panic as you have dropped at the right page. 

Here, in this informative post, we will walk you through some of the most effective and easiest troubleshooting hacks by which you can easily address this annoying technical glitch of the Windows 10 system. Therefore, without delaying too much, let’s get into the solutions directly. 

Desktop Background is Black Windows 10: Generic Reasons

You need to keep this in your mind that whenever it comes to the technical glitches, then it is never just one reason. Hence, if you are facing this same “desktop background is black” error on your Windows 10 system, then you must realize that there could be multiple reasons leading to this frustrating situation. 

Thus, take a look at some generic reasons that can commonly trigger this troublesome Windows 10 issue. 

  • This issue may occur because of the third-party application for modifying the settings of the display. 
  • You may encounter this annoying error because of the corrupted files or some damaged folders of the system. 
  • This issue might occur because of the backdated and out-of-date graphics driver of the system. 
  • Due to an incorrectly installed Windows update. 
  • You may encounter this annoying error due to some other internal technical glitches of the Windows 10 system.  

Easy and Effective Ways to Resolve the Black Desktop Background Issue Effectively:

As this is a technical glitch inside the Windows 10 Operating System, there are some easy workarounds that we have found useful in this scenario. 

Here, in this context, we are about to explain some of the most useful and easiest troubleshooting hacks by which you can easily diagnose and fix this disturbing black desktop background error on your own. 

Hence, it is suggested to follow the fixes carefully and implement them in the correct order to get instant result.

Way 1: Enabling “Animate Windows When Minimizing and Maximizing”

This is the most fundamental method that you should try to get rid of this annoying technical glitch. Moreover, you need to make sure that this setting is enabled on the system. 

In case, you disabled this setting by mistake, then you need to re-enable it in order to fix this troublesome glitch. To perform this action, go through the following steps:

  1. At first, press down the Windows logo key and at the same time press down the R key o your keyboard. This process will invoke the Run dialog box. 
  2. After that, write “cpl” in the run dialog box. Tap on the Ok button. Alternatively, you can press down the Enter key on your keyboard. 
  3. This process will open up System Properties. 
  4. Tap on the Advanced tab in the System Properties. Now, the Performance options window will show up on the screen. 
  5. After that, you need to enable the “Animate Windows When Minimizing and Maximizing” setting. Choose the Apply button and tap on the OK button to proceed further. This process will save the changes to settings that you have made. 
  6. After completing all the above-described steps, restart the system. 
  7. At last, you need to check the system to see that the issue is fixed or not. In case, the technical glitch still persists, then it is advised to move out to the next troubleshooting method given below.

Way 2: Disabling “Show Lock Screen Background Picture on the Sign-in Screen”

To disable the “Show lock screen background picture on the sign-in screen” settings, you need to follow some easy steps. Go through the below passage in detail to know the steps:

  1. At first, right-click on the Start menu to open the Windows settings. Tap on the Settings option in the list of options. After that, tap on the Personalization setting option in the Settings menu. 
  2. Next, tap on the Lock Screen option. You may get this option on the left side menu. After that, tap on the toggle button to disable the “Show lock screen background picture on the sign-in screen” option. 
  3. After completing all the above-described steps, restart the system. 

At last, you need to check the system to verify that the black background in the desktop issue is fixed or not. In case, this technical glitch still persists then, it is advised to move out to the next troubleshooting method given below.

Way 3: Change your Wallpaper

Before changing the wallpaper of the system, you must disable all the third-party application of the system. After that, go through the below-mentioned easy steps to change the wallpaper:

  1. At first, go to the Start menu and tap on it to open. 
  2. After that, go to the Search box of the Start menu and write “Setting: in the search box. Tap on the Search button or press down the Enter key on your keyboard to proceed further. 
  3. Now, you need to choose the Personalization option from the list of results.
  4. You will get a list of the menu. 
  5. Select the Background option in the menu.
  6. Choose the Slideshow option from the drop-down list in the Background option. Doing so will let you check whether uninstalling the third-party application has fixed this technical glitch or not. 

In case, the Slideshow of the system is working properly, then you can easily change the background of the system to a static image. For better result, restart the system. 

After completing all the above-described steps, you need to check your Windows 10 system to verify that the “black desktop background“ error is settled or not. In case, this technical glitch still continues, then it is recommended to refer to the next method discussed below.

 

Way 4: Removing the Damaged TranscodedWallpaper.jpg File

Sometimes, this annoying technical glitch may arise because of the corrupted TranscodedWallpaper.jpg file of the system. In such a scenario, the Windows 10 Operating System is unable to display your chosen wallpaper on the screen.

 To remove the damaged TranscodedWallpaper.jpg file, check out the steps provided below:

  1. Open a web browser and go to the Address bar of the web browser. 
  2. After that, you need to paste the following web address in the address bar of the web browser. (In such a case, you can use any web browser to paste the web address as per your choice and requirement.)

%USERPROFILE%\AppData\Roaming\Microsoft\Windows\Themes\

  1. Now, you need to look for the file which is titled as TranscodedWallpaper, whenever you are inside the folder. 
  2. In this step, you need to change the name of the file to “TranscodedWallpaper.old” (no quotes).
  3. In case, you see a file with the name Settings.ini, then you need to open it in Notepad.
  4. After that, delete the contents of the file.
  5. Tap on the Ok button to save the changes that you have made. 
  6. At last, close the Notepad.

After completing all the above-described steps, follow the steps from method three and select a new wallpaper as the background of your desktop. Lastly, restart the system. 

Now, check your Windows 10 system to see that the technical glitch is resolved yet or not. If the black background desktop issue still persists and averting you to use the system, then move out to the next method given below.

Way 5: Fixing the Settings for Ease of Access

In case, if the above-mentioned methods did not work for you, then try this way to resolve this annoying technical glitch of the Windows 10 system. 

To perform this action, check out the steps listed below:

  1. Go to the Start menu and tap on it to open. 
  2. Write “Control panel” in the search field of the Start menu. 
  3. Now, you will get a list of options. 
  4. Tap on the Ease of Access option from the list of options. 
  5. After that, tap on the Ease of Access Center.
  6. Next, choose the Make Computer Easier to See.
  7. Now, you need to look for the option which states that “Remove background images (where available) is unchecked.”
  8. In case, the box is marked, tap on it to deselect the option.
  9. Choose the Apply button to save the changes that you have made. 
  10. At last, set a new desktop background for the system. 

Final Outcome

That’s it! We hope that now you can easily resolve this “black desktop background” issue on your Windows 10 Operating System. Here, in this informative post, we have described some of the most effective and easiest troubleshooting hacks to eradicate this troublesome technical glitch within a flicker of time. 

Moreover, this article assists non-tech savvy persons. Therefore, you do not require any extra technical knowledge or ideas to execute the above-mentioned troubleshooting hacks. In case, you face any issues while performing the troubleshooting methods and steps or you have any queries, then drop us a comment in the below section.      

02Jul/19

Got Stuck With “Windows Live Mail Error ID 0x800ccc0f”?: Adopt Effective Resort

Although the use of Windows Live Mail feature is not in vogue, some Microsoft users still stick to it. Windows Live Mail error id 0x800ccc0f is one such error which you generally encounter while using Windows Live Mail.

When you stumble upon the error message termed as  ‘Unable to send or receive messages for the [your account name]’, your server terminates the connection all of a sudden. The most probable causes for this issue are the problems in the server, network issues, a prolonged period of inactivity and many more. 

Moreover, this error takes place owing to several other factors. Therefore, we suggest you try each of the solutions in order to counteract this error.

Therefore, delve into the top 10 tips to resolve the above-mentioned issue:

Convenient Tricks To Prevent Windows Live Mail Error ID 0x800ccc0f

You can go through under-mentioned hacks to prevent the above-mentioned issue:

Modifying the Ports

The first resort is to pull your port settings. In order to initiate the process, modify the port and change it to 995. Please ensure that you tick the SSL checkbox. 

Moreover, set your port to 465 for the purpose of outgoing emails and now activate SSL. Now, check if the issue is resolved or not.

Deactivate the Third Party Antivirus Temporarily

This step mainly involves switching off the third-party antivirus since it creates a major problem with the Windows Live Mail client. After doing this manipulation, if the issue ceases to exist, then you can contact the manufacturer. Otherwise, you can change the antivirus.

Scanning the System for Malware

If deactivating antivirus doesn’t solve this problem, you can perform a thorough scan for the system. You can follow the below-mentioned steps to perform the scan effectively in Windows 10:

  1. In order to begin the process, move to the Start menu.
  2. After that, click on the Settings tab. Now, press Update and Security.
  3. Then, click on Windows Defender. Now, you can press the option termed as Open Windows Defender. Thereafter, click on Full.

In Windows 8.1, you need to go to the Start Menu. Now, enter “Windows Defender” in the search bar. After that, click the option labeled as Windows Defender.  Now, click on Update and click on Home. After that, move to the Scan option and click on Full. Finally, press Scan now.

In Windows 7, you just need to follow the path below.

Start -> Type ‘Defender’ into the Search box -> Windows Defender -> Scan

Uninstall as Well as Reinstall of Windows Live Mail

This step helps many users who stumble upon the Windows Live Mail error ID 800ccc0f. Let’s have a look at the under mentioned steps to accomplish this:

  1. First of all, you have to open the Start Menu. After that, move to the Control Panel and click on the Programs tab.
  2. Now, move to the Programs and Features tab. Then, pinpoint the Windows Live Mail option. Now, click on Uninstall to end this process.

Finally, install it again to examine if you encounter and send messages through Windows Live Mail feature.

Troubleshooting the Network Error

If the above-mentioned issue still persists, then there might be a problem in the network. 

Here are some of the troubleshooting steps that you must follow to know how to fix Windows Live Mail error ID 0x800ccc0f:

Windows 7

  1. In order to begin, click on Start. From there, move to Control Panel. Now, click on Network and Internet.
  2. After that, move to Network and Sharing Center. Then, click on Fix a Network Problem.

Windows 8/8.1

  1. In order to begin, click on Start. Then, navigate to Control Panel. 
  2. After that, click on Network and Internet.
  3. Then, press on View network status and tasks.
  4. After that, press Troubleshoot problems option. Now, you will find the Network and Internet Troubleshooter tab. 
  5. Now, go for the option Fix a Network Problem to complete the process.

Windows 10

  1. In order to initiate the process, press the combination of Windows as well as S key in order to open the Search box. Now, enter Network troubleshooter without using quotes.
  2. Now, choose Identify and repair network problems from the available list.
  3. Finally, go through the on-screen instructions that pop up in the troubleshooter.

Reinstalling Network Adapter

Incessant occurence of Windows Live Mail error ID 0x800ccc0f signifies that network adapter is severely damaged. In such a situation, you might take the help of Device Manager. Below are the steps that you can follow to accomplish this:

Windows 10

  1. In order to begin the process, press the combination of Windows as well as X key. Now, click on Device Manager. 
  2. After that, find out the network adapter. Then, you can right-tap on it and press Uninstall.

Windows 8/8.1

  1. In order to initiate the process, you can right-tap on Windows logo icon. Then, click on the Quick Access Menu.
  2. Now, choose Device Manager from the available list. 
  3. Furthermore, choose the designated network adapter. After that, just right-click on it and press Uninstall.

Windows 7

  1. First of all, click on Start. After that, move to Computer and then right-click on it.
  2. Furthermore, click on Manage and now, you will get through with the Computer Management Screen.
  3. Moreover, click on the Device Manager. Then, you can right-click on the network device. After that, click on Uninstall.

After you uninstall the network adapter, you can reboot the system. With the help of the OS, you can reinstall the driver automatically. If this is not the case, you can download the latest version from the manufacturer’s website and then, start installing it in your PC.

Updating Network Driver

In order to initiate the process, you need to open the Device Manager. After that, choose network adapter from the available list. and select Update Driver Software option. If the Device Manager fails to perform this, you need to solve this manually.

You can do this by searching on the Internet the version you require. You can always use any specific software in order to update the driver in a single click. 

Use of Windows Live Mail in Another Windows Account

If you encounter Windows Live Mail error, it signifies that the Windows account is having certain problems and requires immediate change. In this case, you might think of another account and then go ahead running the mail agent. If this workaround is effective, you should use the new account.

Opening Windows Live Mail in a Different P.C.

The worst part of the story is the root cause of the problem which lies with the computer. If the Windows Live Mail account is compatible with another system, you should undergo thorough checkup of the system. This can also take place from the non-optimal settings or there may be accumulated junk of corrupted files. 

If you use any suitable software, it can be of great help in this regard. With the help of proper tools, you can optimize the performance of the PC and make other apps or programs run in an effective fashion.

Fixing Registry

This section will tell you how to fix Windows Live Mail error ID 0x800ccc0f through the registry files. If the above workarounds are not effective, then there might be a problem in the registry. 

It might contain unauthenticated keys or corrupted entries that can hamper your system, thereby, leading to this disgusting error. Therefore, to counteract this issue you have to repair the registry thereby eliminating the mail client problem. 

You can do so using any specific Registry Cleaner.

To Sum It Up

To wrap up this discussion, we must say that all the effective hacks pertaining to Windows Live Mail error 0x800ccc0f are mentioned in this informative guide. Therefore, if you follow each and every step thoroughly, you can surely be able to fix this issue in no time.

Moreover, you can refer to the user manual for a quick glance. Apart from this, you can feed your comment in the comment section.

27Jun/19

Little Known Tips To Fix The Error Code 0x80072ee7 Quickly

While updating Windows 10, several users are getting an error code 0x80072ee7. When this frustrating error occurs, the users can encounter an error message showing “the server stumbled.”

In case, you are using a wrong DNS server address, you can face this error. Besides that, you can also get this error with your device if you don’t have certain registry permissions. Problematic or buggy software can also be a reason to encounter this error. 

If you are also facing this error, and want to fix it, then you have incidentally dropped on the right page. This article contains more than one effective methods with the help of which you can fix this bug on your own. 

Effective Methods to Fix the Error Code 0x80072ee7 in an Instant

Here are more than one method, using which, you will be able to resolve this particular error on your own. You can choose the one whichever looks convenient to you. 

Method 1: Change the DNS Server Address

As per some users, you can also change the DNS server address in order to fix this particular error. So, you can try out this workaround using the steps mentioned below:

  1. At first, navigate to the Windows Search, and here type control panel and open the most relevant search results. 
  2. After that, Go to Network and Sharing Center, and tap on the Change adapter settings which is situated in the left pane. 
  3. Select the network which you are currently using and place a right click on it and select Properties.
  4. Now, you need to scroll down to Internet protocol version 4 (TCP/IPv4), and select Properties.
  5. Next, you need to select Use the following DNS Server addresses option and enter these values: 8.8.8.8 and Alternate DNS Server – 8.8.4.4.
  6. After performing all of these steps, you need to restart your computer and take an attempt to update Windows 10 again, if this error persists, follow the next method. 

Method 2: Perform SFC Scan 

Windows 10 contains a built-in error checking tool, which is known as SFC scan. This tool scans your computer and locates the possible problems to fix them. Here are the steps which you can use to perform this action:

  1. Firstly, press the Windows Key + X and choose Command Prompt (Admin) from the menu. In this case, you can also use Powershell (Admin). 
  2. In the Command prompt window type sfc/scannow.
  3. This process will last for some time. 
  4. After completing this procedure, close the Command Prompt. 
  5. In case you notice the SFC scan fails to be completed, you need to perform DISM scan. 
  6. To perform so, navigate to the Command Prompt as Administrator and try to run DISM /Online /Cleanup-Image /RestoreHealth command.
  7. Once you finish the DISM scan, you need to check whether this problem has been resolved or not, if not, follow the alternative guidance. 

Method 3: Change Registry Permissions

If all of the previous methods fail to fix this bug, you can change the registry permissions to resolve this error. In order to change certain registry permissions, try to follow these steps:

  1. At first, you need to press the Windows Key + R to open the Run dialog box. In this dialog box, type regedit. Press the Enter button or tap on the OK button. 
  2. Now, in the left pane, go to the HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpip. 
  3. After that, right click on the TCP/IP and select Permissions from the menu.
  4. Click Advanced.
  5. Now, you need to make the box be checked against, Replace all child object permission entries option and tap on the Apply and click on the Ok button to save the changes. 
  6. After performing all of these steps, you need to check whether it fixes the error or not. 

Method 4: Be Sure that Windows Update and DNS Client Services are Running

You can also be sure about that, the  Windows Update and DNS Client Services Are Running. To perform so, try out these steps:

  1. Firstly, press the Windows Key + R at the same time to launch the Run dialog box. 
  2. Now, enter services.msc and tap on the Enter or click on the OK button to continue. 
  3. When you see the services window opens, you need to find out  Windows Update and double click on it, in order to open its properties.
  4. In case you notice the Startup type is set to Disabled, make sure that you need to change it to Manual or any other value. 
  5. After that, type Apply and click on the Ok button to save the changes. 

Once you are done with the steps, you need to check if this error has been resolved or not. In some cases, you need to restart your PC to apply the changes. 

Method 5: Uninstall Problematic Software

You can also uninstall the glitched software due to which you are getting this particular error. On that note, let’s perform these steps:

  1. At first, go to the start button and navigate to the search bar.
  2. In the search bar, search for Uninstall a Program. 
  3. You will be able to see a list of installed software in your device. 
  4. From this list, you need to locate the software due which you are getting this error. Tap on the uninstall button, to complete the uninstallation procedure. 
  5. After completing this whole process, try to reboot your device and check the status of the error. 

This time you will be able to troubleshoot this error. 

To Conclude

Here are some expert provided hacks using which you will be able to resolve the error code 0x80072ee7 on your own. For these reasons, if you have any further queries, you can inform us via your reliable comments. In case, you need any expert’s advice you can also directly contact an expert for further guidance. On that note, let’s conclude this post here and will see you in the next one. Till then stay glued with our website.

27Jun/19

Windows Can’t Communicate With The Device Or Resource: Troubleshoot This Error With Amazing Hacks

Windows can’t communicate with the device or resource (primary DNS server)” is an error message which the users might get after running a troubleshoot when you can’t connect with the internet using your computer. If this is the case, you are worried about and looking for the exact solutions, then you have come to the right article. 

This article will match your query by providing you the useful solutions to the problem. It is advised to read this article thoroughly and till the end before using them to get the perfect and complete knowledge of the steps.

Windows Can’t Communicate With The Device Or Resource: Effective Fixes

Here, from this article, you are going to learn the effective methods to resolve the Windows failing to communicate with the device or resource issue. So, let’s start.

Method 1: Update your Network Drivers

According to the few users, they got the Windows can’t communicate with the device or resource fix by updating the network drivers. The steps you have to follow to update your network drivers are as explained below. 

To update the network drivers connecting with the internet is an essential requirement. But if you are not able to connect your system with the internet, you need to download the required network driver update with the help of another device which works normally. 

Once you have successfully downloaded the driver in another device transfer that to your PC which shows Windows unable to communicate with the device or resource error message while troubleshooting this internet glitch. Go through each step to learn the full procedure to update your network driver during the problematic condition of your system.

Download Network Driver Update on Another PC and Transfer it to the Erroneous PC

The foremost task that you need to perform as said earlier to update network driver is to take the help of another device to download the update network driver. For this purpose, at first, you need to open a browser on the other device. And then, go to the network manufacturing website using the browser. After that, get the updated version network driver which is suitable according to your system configuration in which you have got the error message. 

Once, you get the matching driver according to your PC configuration, download it. Next, transfer the downloaded driver to the error showing PC with the help of a USB storage device. After that, follow the further instructions as explained below.

Open Device Manager and Update Network Driver

After transferring the update network driver to your PC, proceed with the further instructions to solve the Windows can’t communicate with the device or resource issue.

  1. Open the Run bar window with the help of the Windows and the letter R key. Press both the keys (Win+R) at a time.
  2. Now, on the Run bar, type “devmgmt.msc” without the quotations.
  3. Next, click on OK or press the Enter button. On doing this, the Device Manager window will open on the screen.
  4. Further, under the Device Manager window, scroll down to the Network adapters option and then double-click on it to expand.
  5. Then, from the Network adapters expanded list, right-click on the driver option for which you have downloaded the update and transferred that on this PC.
  6. After that, from the Menu window, select the Update Driver Software option. This will open up the “How do you want to search for driver software?” window with the options that are provided below:
  • Search automatically for the updated driver software
  • Browse my computer for driver software
  1. Click on Browse my computer for driver software, this will get you a window open. With the help of the window, navigate to the location where you have placed the file on your computer from the USB storage device. Once you locate the file, double-click on it to load and then follow the further instructions displayed on the screen to install it on your PC.
  2. At last, close all the open windows and restart your PC along with the network device.
  3. Now, when you open your computer and find the network device LED stable, hopefully, you can browse the internet successfully without getting this error message.

In case, after updating your network device driver, if still, the error exists, try the further method.

Method 2: Ensure the Correct Network Properties Settings

Sometimes, due to the inappropriate network properties settings, the Windows can’t communicate error occurs. If this is the case, then to solve the error, you need to follow some simple steps as explained below.

Launch Control Panel and Set the View by into Large Icons

The primary steps to follow to ensure the correct network properties settings are listed below:

  • At first, tap on both the WIndows and the letter R button at a time. This will open the Run bar window on the screen.
  • Then, on the Run bar, type control.
  • After that, click on the OK button. This will open the Control Panel window open on the screen.
  • Now, check the View by section of the Control Panel window that is present near to the right top-most portion on the screen. If the “View by” is set as anything else rather than Large icons, then you need to drop-down the menu list and select the Large icons option from the list.

Go to Internet Protocol Version 4 (TCP/IPv4) Properties

The secondary steps that you need to follow to ensure the correct network properties settings. These steps are cited below:

  • After ensuring the View by into Large icons, from the Control Panel window, click on Network and Sharing Center.
  • Then, from the left-hand side panel of the window, select the Change adapter settings option.
  • Further, on the next window, you will see both the Local Area Connection and Wireless Network Connection options. Right-click on the network type that you are using to browse the internet from the two options (Local Area Connection/ Wireless Network Connection).
  • After that, to continue the method, you need to select the Properties option from the menu list.
  • Now, under the Network Properties window, ensure that you are in the Networking tab.
  • Next, from the available options under the Networking tab, go to Internet Protocol Version 4 (TCP/IPv4) and ensure that the checkbox for it is active.
  • After that, click on Internet Protocol Version 4 (TCP/IPv4) to highlight.
  • Next, select the Properties button from the Network Properties window that is present beside the inactive Uninstall button. After clicking on the Properties button, you will get the Internet Protocol Version 4 (TCP/IPv4) Properties window open. 

Ensure that the Checkboxes are Active

The end steps to ensure the correct network properties settings are described below:

  • On the Internet Protocol Version 4 (TCP/IPv4) Properties window, ensure that both the below-said options check-boxes are active. 
  • In case, if you detect any or both the options are not active, then to make them active, you just need to click on the checkbox beside to them. If the option is active, then you can identify them easily by seeing a dot inside the circle related to the option.
  • Obtain an IP address automatically
  • Obtain DNS server address automatically
  • At last, click on the OK button to save the changes.
  • Then, restart your computer and the network device to verify that the error has been resolved. 

Hopefully, next time when you are going to connect to the internet, you will not get the Windows can’t communicate error message window on the screen.

All these are the complete methods by the application of which you can fix the Windows can’t communicate with the device or resource error efficiently. If you fail to troubleshoot this issue on your own, then you can contact a professional to get the issue resolved. 

02Jun/19

RPC Server is Unavailable Windows 10: Solve This Error With Advanced Solutions

One of the most commonly seen error notification on Windows 10 devices is the dreaded “RPC server is unavailable Windows 10.” This error might occur where communication between two or more than two computers with any version of Windows are involved through a network. Generally, this error appears due to the corrupted Windows registry files or the incomplete installation of particular software. 

Apart from these, some of the other events include faulty network connection, corrupted system files, virus or malware infection. Moreover, antivirus and firewall can also responsible for this error. It is a quite harmful error as it prevents the device to run normally. Once the error arises, the users notice that their device start to lag and respond slowly to the mouse and keyboard. 

If you are going through the same error and wondering to get permanent solutions, then this is the right place for you. Here, in this article, we are going to discuss all the possible solutions by which you can easily deal with this error.

Feasible Hacks to Eradicate “RPC Server is Unavailable” Error on Windows 10:

Whenever the users get stuck with this error, they want to know “How to fix RPC server is unavailable Windows 10.” Follow the below-highlighted methods and implement them accordingly in order to get the fruitful results:

Ensure that the RPC Services are Running Properly:

The RPC related issue might be triggered by malfunctioning services running in the background. To make sure that all the RPC associated services are running properly, go through the under mentioned steps:

Step 1: Primarily, locate the Windows Home key on your keyboard. Once you locate it, press it along with the R key to invoke the Run dialog box, Once the Run dialog box opens, write “services.msc” and hit the Enter button or choose the OK button.

Step 2: This process will initiate the Services windows. Now, in the Services window, you need to search for the items named DCOM Server Process Launcher, Remote Procedure Call (RPC), and RPC Endpoint Mapper. 

Step 3: After locating these items, check whether the status is tagged as running. Also, be sure that the Startup Type is set as Automatic.  

Check the Windows Registry Entries

The following instructions will help you to modify the Windows registry entries on Windows 10 device. But, you need to back up the Registry entries and create a Restore point. In case, something went wrong, then you can easily revert the new changes and avoid the serious damage.

Step 1

At first, you have to log in as Administrator. Then invoke the Run dialog box by pressing the Windows logo key along with the R key simultaneously. Once the Run dialog box opens, write “regedit” and hit the Enter key to execute the command. 

Step 2

Now, you are in the Windows Registry Editor. Here, you need to go tough the following path: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\RpcSs. Then, verify if all the registry entries are in its normal state.

Step 3

In case, the Startup type wasn’t set as Automatic, then right-click on the “Start” DWORD entry that is located on the left pane of the window. Now, in the new appeared window, set the value as 2 and confirm the process by tapping on the OK button twice. 

Step 4

Thereafter, go to HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\services\\DcomLaunch and ensure if none of the registry files are not missing. In case, the DCOM Server Process Launcher was not correct, then hit the Start button and set the value as 2.

Step 5

After that, navigate to HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\services\\RpcEptMapper and verify that any registry entries are not missing again. In case, the RPC Endpoint Mapper settings were not correct, then tap on the Start registry key and set the value data as 2.

Once you are done with the entire process, hit the Apply option as well as the OK to apply all the new changes. Lastly, exit the Windows Registry Editor and check if the issue gets removed.

Configure Windows Firewall

Sometimes, Windows Firewall might be restricting the traffic asked by RPC. As a result, such error appears. Therefore, if you use Windows Firewall, then follow the under mentioned instructions:

Firstly, hold the Windows Home key and press the R key simultaneously on your keyboard to open the Search dialog box. Once the Search dialog box opens, write “Control” and hit the Enter key or choose the OK button to further proceed.

In the next window, locate and select the System and Security button that is present on the left side of the screen. After that, go to the Windows Firewall section and tap on Allow an application through the Windows Firewall. 

After that, search for the Remote Assistance and ensure that the boxes for Domain, Public, Private are marked. Once you are done with the entire steps, reload your device and check whether the error gets removed or not.

Check the Network Connectivity

After configuring the Windows Firewall, if you still get stuck with the same error, then you need to check your network connectivity. You can do this by following the steps listed below:

At first, press and hold the Windows logo key and R key altogether on your keyboard. After that, type “ncpa.cpl” (no quotes) into the Run dialog box and hit the Enter button or click on the OK button. 

Now, you will see that all the Network Connections are available on your device. Tap on the Network that you are using right now and then click on its Properties from the menu list. Afterward, you need to search for the File and Printer Sharing for Microsoft Networks and Internet Protocol Version 6 (TCP/IPv6). Once you find it, be sure that the checkbox beside each of them are marked. 

Flush DNS & Renew

Most of the affected users claim that they managed to fix this RPC server error after flushing the DNS. But before proceeding with this method, ensure that the required services are running properly. To flush the DNS, you have to follow the steps mentioned in the below section:

Primarily, locate the Windows Logo key on your keyboard. Once you locate it, press it along with the R key simultaneously to launch the Run dialog box. Once the Run dialog box opens, write “cmd” in it and press the CTRL function key along with the Shift key to initiate an elevated Command Prompt.

Here, you need to open the Command prompt with Administrator rights. So, if you are asked for the User Account Control, then hit the Yes button or press the Ok button to grant the Administrator’s rights. 

Now, you have to write the following Command into the Command prompt and press the Enter button or tap on the Ok button. 

“ipconfig /flushdns” This command will help to flush the current IP configuration from your device. Once the previous command successfully gets executed, enter the following command into the Command Prompt window.

“ipconfig /renew” This command will help to create new IP configuration. Once the IP has been renewed, exit the Command Prompt and re-do the previous actions that were triggering RPC server is unavailable Windows 10 to verify whether the error gets resolved or not.

Perform A System Restore

If none of the above methods works for you, then you can perform a System Restore. This will resolve the problem that you are facing.

Firstly, tap on the Windows Start button in order to initiate the Run dialog box. Now, in the Run dialog box, type “System Restore” and hit the Enter key or click on the OK button to view the menu.

Now, select the Windows System Restore button. Here, you might be prompted to enter the Administrator password. Simply enter the Administrator password. After that, follow the further instructions to choose a proper Restore point for your device. Next, hit the Enter button or click on the OK button. 

Lastly, confirm the process by tapping on the Ok button twice. Now, reboot your device. Once your device restarts, verify if the error gets eliminated from your device.

Concluding Remarks

We have mentioned all the effective methods to eradicate the RPC server is unavailable Windows 10 login from your device as soon as possible. Therefore, try out all the methods one-by-one to get accurate ways to resolve the error. 

But, while performing the methods, if you face any difficulty, then you can share your difficulties with us. You can do this by commenting on the feedback section below. On the other hand, you can also opt for expert assistance.

27May/19

Best Hacks To Resolve The Windows Error 0x80300024

When attempting to install Windows Operating System, you can encounter the error 0x80300024 on the computer. When this error pops up on your screen, then the error message that comes up on the screen is “Windows is unable to install to the selected location.”

There can various reasons for the occurence of this issue. Some of the usual ones are that if there is any hard drive that is not required, then due to its interference you might encounter this issue.

Even due to the faulty USB flash drive or the port, you might encounter this problem. Further, if the hard disk is not set as the main boot device, then there are chances for you to face this issue. 

Further, if the hard drive has no much space left, then also this issue can pop up. Moreover, if the hard disk has any type of internal problem, then this glitch can show up on your screen.

Excellent Methods to Eradicate the Windows Error 0x80300024:

In this section of the article, you will get various methods that will help you to eliminate this error 0x80300024 from the computer that runs on Windows.

Procedure to Clean the Hard Disk Space

When the hard disk does not have enough space to hold the Windows installation files, then due to that cause also, you can face this issue. The easiest solution to resolve this problem is to clean or format the hard drive.

The procedure on how can you achieve this is as follows.

  • First, insert or connect the installation media into the computer and then reboot it. Do boot your computer from the installation media and not from the hard drive.
  • When the Install Windows screen comes up, then choose the language that you prefer from the drop-down list, the layout of a keyboard, etc. After that, at the bottom of the screen, choose the Next button.
  • Now, the ‘End User License Agreement’ screen will appear, which you can read fully and then, simply select the ‘Accept’ button.
  • In the next screen that comes up with a heading ‘Which type of installation do you want?’, choose the ‘Custom (Advanced)’ option. 
  • Next, when you see a page that asks ‘Where do you want to install Windows?’, then go to the bottom and tap on the ‘Drive options (advanced)’ link. Now, on that window only, carefully select the partition of the hard drive where you want to install Windows from the list.
  • After the right partition selection gets over, then just below the list, choose the ‘Format’ option. When a prompt appears, then click on the ‘Yes’ button.
  • At this moment, wait for the formatting process to get over fully. Once that procedure is over, then click on the ‘Next’ button at the bottom right edge of the window.
  • Finally, attempt to complete the installation procedure of the Windows and see if this error comes back or not.

Disconnect any Other Hard Drive Installed Within your Computer

When the computer in which you are trying to install the Windows has more that one physical hard drive, then that drive may interfere with the installation process. Due to that interference, you may get the “Windows error 0x80300024”.

The best solution to eradicate this issue is to disconnect or remove the other hard disk from the system where the installation of the Operating System is not occurring. After the removal of the unnecessary hard drive, attempt to install the Windows into the computer and then see whether you are getting this issue or not.

Set the Hard Drive as a Main Boot Device 

There is a possibility for you to encounter this error if the hard drive where the Windows gets installed is not set as the main or primary boot device. To correct this issue from ever occurring, you need to set the hard drive where the Windows is installed at the top of the boot order. 

In other words, you can say that the best answer to removing this issue is to set the target installation hard drive as the primary boot device. Follow the lines below to know how can you achieve it.

  • First, press the ‘Power’ button to start the device.
  • As soon as the initial screen comes up, then repeatedly press on the ‘Delete’, F2 or some other keys according to the manufacturer of the computer to enter in BIOS page.
  • Once the Basic Input/Output System screen appears, then use any following arrow keys ‘Up’, ‘Down’, ‘Left’ and ‘Right’ to choose to the ‘Boot’ option.
  • Under this ‘Boot’ section, you can change the order of the boot or the set a specific hard drive as the primary boot device. 
  • Now, inside that section, locate the specific hard drive where the Windows is installed and place it on the top by following the instructions on the right panel of the screen.
  • Once the boot order is correctly set, then ‘Save’ the changes and ‘Exit’ from the BIOS.
  • Finally, let the Windows Operating System load as usual and then check whether this error comes back or not.

Connect the Installation Media in an Alternate USB Port

When you attempt to install the Windows OS from the USB flash drive where the installation media is present, then insert it into some USB port and encounter this issue. Then there is a possibility that the USB port in which the flash drive is connected to has some issue.

Now, the simplest solution to resolve this problem is to take out the flash drive and then put it on the other USB port present on the computer. Next, after connecting the flash drive to a different USB port, then check to see if this error comes up during the installation process.

Change the Problematic Hard Drive

Sometimes, due to a glitchy hard drive that can prevent you to properly install the Windows OS and can give this error. So, at first, check whether this error comes due to a problematic hard drive. 

Now, if the answer is yes, then the best solution to get permanent relief from this issue is to replace the hard drive with a brand new one.

Concluding Part

To fix the Windows install error 0x80300024, simply follow the methods on the previous section of this article carefully and minutely. But, although after following every step provided in the last section, still, if you are unable to mitigate this error, then do not worry at all.

Only provide detailed information about the problems that you are facing on the comment section below this article and get an instant reply from an expert.

27May/19

Most Efficient Techniques To Resolve “This App Can’t Run On Your PC” Error

“This app can’t run on your PC” is one of the most common error messages which is encountered by Windows 10 users while trying to run the app on their PC. This error message can affect any and all Windows software and applications. In addition, the error message can also affect multiple applications on the same computer.

Generally, if the SmartScreen feature is turned on you can notice this error message. Also sometimes, an outdated version of the Operating System can also cause this error. Another effective reason is that if the system files are corrupted or damaged on the system. 

Therefore, if you are also dealing with this error message then this article will help you out. The following are some of the most effective procedures that you can use to try and get rid of the error instantly.

Procedures to Fix This App Can’t Run on Your PC Issue:

In this section, we are going to discuss some of the easy and useful tricks and procedures to troubleshoot this particular error message on the system. Let’s have a look at the section below:

Procedure 1 – Update the Latest Version of the Operating System

An older version of the Operating System can cause this problem on your computer. So, you need to update the Operating System immediately. To perform this procedure, follow the steps given below:

  1. First of all, hold the Windows key and at the same time press the I key to open the Settings window.
  2. From the Settings window, locate the Update & Security section, select it.
  3. In the Update & Security window, go to the left side panel and select the Update section.
  4. On the right side window, you will find the Check for updates button, click on it to check whether any updates are available or not. If yes, then select the update button. 
  5. After completing the update process, reboot the device and then check if the issue has been fixed or not. 

Procedure 2 – Turn On the Sideload Apps

Turning on the sideload apps is one of the effective procedures that we have shared to eliminate this problem on your computer. If the sideload apps feature is turned off then you can see this error message.  Now, do the following to turn it on:

  1. At first, press the Windows logo key along with the I key to launch the Settings window.
  2. In the Settings window, double-click on the Update & Security section. 
  3. From the Update & Security window, select the For developers tab from the left side panel.
  4. In the Use Developer features window, tick on the Sideload Apps button to turn it on. After turning it on check whether the error message still occurs or not. If you find this problem then you should move to the next one. 

Procedure 3 – Use a New Administrator Account

If you are on a guest account then you should try to switch a new administrator account. Already if you have an administrator account but the error message still pops up then, you can easily create a new administrator account to resolve the error. To do so follow the steps:

  1. Firstly, right click on the Windows icon to open the WinX Menu list and choose the Settings option.
  2. From the Settings window, double-click on the Accounts button and then select the Family & other people tab from the left side panel. 
  3. In the right window, scroll down the page and find the Other People tab and then select the Add someone else to this PC button.
  4. In the next window, you will see I don’t have this person’s sign-in information button, click on it. After that, select the Add a user without a Microsoft account button. From the next window, enter your personal details and then select the Next button. 
  5. Now you will find that the new administrator account has been created. Once it is created, you have to switch to the new account. So, click on the new account and then select the Change account type option. From the Change account type section, select the Administrator button to switch your account. 

Procedure 4 – Turn Off the SmartScreen

By turning off the SmartScreen feature can also help you to fix the This app can’t run on your PC error message on the system. The SmartScreen is an in-built feature of Windows 10 which is designed to save your computer from malware infection phishing attacks. If this feature is enabled then also you may get this error on your computer. So, it is essential to turn it off. Now, do the following:

  1. Hold down the Windows button and press the S key to launch the Search box, type Change SmartScreen settings and then hit the Enter key.
  2. In the SmartScreen settings window, go to the Security tab and then find the Windows SmartScreen and select the Change Settings button. 
  3. After that, click on the Do not do anything (turn off Windows SmartScreen) button to disable it. 
  4. After doing this, restart the system and then check if the issue has been fixed or not. 

Procedure 5 – Turn Off the Proxy or VPN 

If the Proxy or VPN is enabled then you might get this error message on the system. So, you should simply turn it off in order to get the problem resolved. If you do not know how can you turn it off then, follow the under mentioned steps:

  1. From the keyboard, press the Windows key + R key to launch the Run box. Type Control Panel and then hit the Enter key or select the OK option. 
  2. When the Control Panel window opens, double-click on the Internet Options section. 
  3. From the Internet Options window, move the cursor to the Connections Tab and then select the LAN Settings button.
  4. In the LAN Settings window, unmark on the Use a proxy server for your LAN button and then click on the OK option to save the changes. 
  5. Once you are done with these steps, restart the machine and then check if this error message comes up or not. 

Procedure 6 – Repair the Windows Files

Due to the corrupted Windows files can also cause this app can’t run on your PC error message on Windows 10 system. So, you have to repair this file by using the System File Checker tool. It is a built-in tool of Windows. To run this tool follow the steps given below:

  1. Open the Search Panel, type Command Prompt and then right-click on the search result. After that, select the Run as administrator button. 
  2. When the Command Prompt window opens, type SFC/scannow command and then press the Enter button to run this. 
  3. Once the process is completed, reboot the device. 

In order to solve This app can’t run on your PC error message, you will have to perform all the steps mentioned in the above section very carefully. With these procedures, you can easily fix this problem on your computer. However, if even after performing all the steps on the previous section, you are unable to eliminate this error message then do not worry. You can take help from an expert guide to get rid of this error message. 

22May/19

Windows Update Error 0x80073712: Effective Methods At Your Fingertips

At the time of upgrading or while installing, if some important system files get corrupted and  Windows upgrade detects it. It immediately stops the procedure and the device encounters an error message showing “Windows update error 0x80073712”.

It means an important file, which is needed by the Windows Setup, is damaged or has gone missing. This error can occur in between of any random update process. 

If you are stuck with this error and looking for a way to resolve it, you can go through this article. It will also aid you if you get this error anytime in the future. So, let’s focus on the troubleshooting procedure at first.

3 Notable Fixes for 0x80073712

Here are some easy methods, which you can utilize to resolve this particular error on your own. So, try to follow the methods whichever looks convenient for you. 

Method 1: Run Windows Update Troubleshooter

Windows update troubleshooter is a useful troubleshooting tool which helps the Windows users to resolve common Windows update issues. In order to perform update troubleshooter, try out these steps:

  1. At first, on your keyboard, you need to press the Windows logo key and type “troubleshoot”. After that, tap on the troubleshoot option. 
  2. After that, tap on the  Windows Update and tap on the Run the troubleshooter option. 
  3. Once you complete all of these steps, you need to follow the onscreen instructions to perform the troubleshooting process.
  4. After completing all of these steps, you need to restart your computer and try to perform Windows Update again and hopefully, you will be able to fix this error. 

Method 2: Perform SFC Scan

System File Checker is a useful feature of Windows which helps you to scan your system files and repair missing or corrupted system files. In order to perform this action, try out these steps:

  1. First of all, using your keyboard, tap and hold the Windows logo key and type “cmd”. After that, right click on the Command Prompt and tap on the  Run as administrator option. 
  2. Tap on the Yes button when you are prompted to confirm the action. 
  3. After that, in the command prompt window, you need to type sfc /scannow and hit Enter to continue. 
  4. Well, it will take some time to locate and replace corrupted system files. Be patient until your device completes this procedure.
  5. Now, you need to restart your device and check whether you are able to fix 0x80073712 or not. If this method fails to resolve the issue, go through the next one. 

Method 3: Run DISM Tool

DISM or Deployment Image & Servicing Management is a handy tool which helps you to resolve Windows corruption based errors. To run this utility, go through these steps:

  1. Firstly, on your keyboard, press the Windows logo key and type “cmd”.
  2. You will be able to see the Command Prompt application in the best match section. 
  3. Right click on the Command Prompt and tap on the Run as administrator button. 
  4. Now, type “DISM.exe /Online /Cleanup-image /Restorehealth” and hit Enter to continue.
  5. Wait until this whole process finishes. After that, you need to restart your computer and the SFC scan again, so that it can help you to replace any corrupted files with the correct ones. 
  6. After that, check for the Windows update and see whether it works.

Method 4: Delete the Windows Update Cache

You can also resolve this issue by deleting the Windows Update Cache. There are the steps using which you can perform this action:

  1. Using your keyboard, tap on the Windows logo key and the “R” at the same time to launch the Run dialogue box. After that, copy and paste “services.msc” in the box and tap on the OK button to continue. 
  2. Scroll down to the bottom and right click on the Windows Update and tap on the Stop button. 
  3. After that, you need to press the Windows logo key and the “R” key at the same time to launch the Run dialogue box. After that, you need to copy and paste  C:\Windows\SoftwareDistribution\Download in the box and hit Enter to continue. 
  4. Now, you need to press the Ctrl and “A” and the same time and right click to pop up a menu and tap on the Delete button. 
  5. When you are asked to provide administrator permission, you need to make the box be checked against Do this for all current items and tap on the continue option.
  6. Now, you need to go back to the Services window and right-click on Windows tap on the Start button. 

Well, after performing all of these steps, you will be able to resolve this error on your own. 

Sum It Up

After going through this article, hopefully, you will be able to fix Windows update error 0x80073712. If you need any expert advice while performing the troubleshooting process, then you can directly contact an expert who can guide you for further. In that case, let’s conclude this post here and stay glued with us to get more effective posts at your fingertips. 

12May/19

Instant Troubleshooting For Windows Shell Experience Host Using Too Much Memory

Windows Shell Experience Host was introduced for Windows 10 to work as a visual manager. It offers a windowed interface for all of the software installed on your computer.

Though this process works fine, it tends to consume too much memory for some users.

Therefore, it is essential to examine your system for Windows Shell Experience Host process consuming excessive CPU. This article has clearly explained how to fix what’s wrong with your system with minimum efforts.

Methods to Fix Windows Shell Experience Host High Memory Issue

Here are some easy yet effective ways to decrease the RAM/CPU usage of your PC. So, follow the methods and pick up the one that will serve your purpose. The same set of solutions will be able to fix a non-functional Window Shell Experience Host as well. 

1. Update the Operating System

The Windows Operating System needs periodic updating to keep availing the all of it fully. Otherwise, you might experience that your Windows is running sluggishly and displaying errors. So, follow the steps given below to install the available updates of the Operating System; 

  1. Click the Start menu and choose ‘Update and Security’ from the context menu. 
  2. On the Windows Update screen, check whether any updates are pending or not. 
  3. If there are any pending updates, then click the ‘Install’ button next to each of them. 
  4. Click the ‘Agree’ button on the resulting popup to install the pending updates. 
  5. If the Windows Update screen doesn’t show any suggested updates, then click the ‘Check for updates’ button on that screen. 
  6. It will prompt Windows to check for updates and install them automatically on your PC. 
  7. After installing the updates, Open Task Manager from the Start menu or the Windows search bar. 
  8. Then, check whether Windows Shell Experience Host is using less memory. If the memory consumption remains the same, then proceed to the next method. 

2. Disable the Background Slideshow 

Background slideshow let you change your favorite wallpapers and enjoy them every minute.  But, as per the opinion of many users, Windows Shell Experience Host takes up too much memory due to this activity. Therefore, disable the background slideshow and opt for a static background picture for your PC by the following steps:

  1. Press Windows logo key and ‘I’ at the same time to access the settings window. 
  2. Click the ‘Personalization’ menu and select ‘Background’ in the left pane. 
  3. Choose ‘Picture’ from the drop-down menu and tap the ‘Save’ button to save the changes. 
  4. Restart the system to see if this trick has worked for you or not. 

3. Turn Off the Automatic Color Changing Feature

Disabling the automatic color changing option can stop Windows Shell Experience Host from eating into your computer memory. Go by the following steps in order to turn this feature off: 

  1. Go to Settings and click ‘Colors’ in the left pane of the settings window. 
  2. Scroll down the window and choose a color section as per your preference. 
  3. Then, uncheck the ‘Automatically pick an accent color from my background’ option and click the ‘Save Changes’ button below. 
  4. If the problem persists, then move on to the next method. 

4. Run a SFC Scan on Your PC

Windows Shell Experience Host might be draining your resources if any corrupted system files are present in your PC. Thus, you need to replace these files by the System File Checker Utility as soon as possible:

  1. Type ‘cmd’ in the Windows search box and press ‘Enter’ to search for the Command Prompt. 
  2. Right-click on Command Prompt from the search results and select the Run as administrator’ option from the context menu. 
  3. Type ‘sfc/scannow’ on the Command Prompt window and press ‘Enter’ to launch the System File Checker utility. 
  4. Wait until the tool scans your PC and fix the corrupted system files present in it. 
  5. Close the Command Prompt window and restart the PC so that the corrupted system files are replaced at the startup. 
  6. Now, verify whether the process has really worked for you. Else, move right away to the next method below:

5. Limit the Amount of CPU Usage

Here we have discussed how to limit the amount of CPU the windows Shell Experience Host process can utilize: 

  1. Click the Windows icon, type ‘task manager’ in the search bar and press ‘Enter.’
  2. Select Task Manager from the list of search results to open the Task Manager window. 
  3. Navigate to the ‘Details’ tab and look for the Windows Shell Experience Host. 
  4. Right-click on the above process and choose the ‘Set Affinity’ option.
  5. Select your preferred CPU limit from the ‘Set Affinity’ option and click the ‘Save’ button to apply the changes. 

6. Repair Corrupted Registry Entries

  1. Right-click on the Start menu and open the Command Prompt. 
  2. Type ‘regedit’ in the command line and press ‘Enter’ to launch the Registry Editor. 
  3. Select the Windows Shell Experience Host related key and click the ‘Export’ option. 
  4. Then, choose a folder from the ‘Save In’ list to save the backup of the particular key. 
  5. Decide on a name for that key, enter it in the ‘File Name’ box and click the ‘Save’ button.
  6. After that, go to the ‘Export Range’ menu and check the ‘Selected branch’ box. 
  7. Tap the ‘Save’ button again to save the specific key with a ‘.reg file’ extension. 

7. Scan the PC for Malware

A malicious program might be violating your system and forcing Windows Shell Experience to consume more memory. It is an effective solution for a Windows Shell experience host stopped working issue. Therefore, use Windows Defender Security suite to scan for malware by the following steps:

  1. At first, open the Settings app and expand the ‘Update and Security’ section. 
  2. Now, choose ‘Windows Defender’ and click the ‘Shield’ icon in the left pane. 
  3. Click the ‘Advanced Scan’ button and select the ‘Full Scan’ option to scan your PC for malware. 
  4. After scanning your PC if Windows Defender security finds malware, then it will remove it immediately from your PC. 

8. Restore the System 

Often a simple system restore ends all problems and thus you can perform a system restore for your PC. The process is quite simple if you follow the following steps:

  1. Type ‘system restore’ in the search box and press ‘Enter.’
  2. Select system restore from the search result and click ‘Ok’ on the confirmation dialog box. 
  3. Then select a time before the Windows Shell Experience Host started making problems. 
  4. The system will restore to the selected time and restart your PC once or twice. 

9. Restart Windows Explorer

Restart Windows Explorer in order to fix a bug that is causing problems with Windows Shell Experience Host process:

  1. Press ‘Ctrl, Shift, and Esc’ keys altogether to open Task Manager directly on your PC. 
  2. On the Task Manager window, click the ‘Process’ tab, right-click on Windows  Explorer and choose ‘Restart.’
  3. After restarting Windows Explorer check whether the problem is fixed or not. 

10. Create a New User Profile

This method will fix the issue if it was occurring due to a corrupted profile. Here’s how can you create a new user account on your PC: 

  1. Open Settings and navigate to the ‘Accounts’ section on the Settings window. 
  2. Click ‘Family and other people’ in the left panel and check the box for ‘Add someone else to this PC. 
  3. Click the ‘I don’t have this person’s sign in information’ link and then ‘Add a user without a Microsoft account’ link. 
  4. Enter the desired username in the field allotted for it and click the ‘Next’ button. 
  5. Check whether the problem is repeating itself with a new user account or not. 

11. Enter the Safe Mode

It is the last method you can try out to fix Windows Shell Experience Host related issues. Follow the steps mentioned below to enable the Safe Mode:

  1. Press and hold the ‘Shift’ key and choose the ‘Restart’ option on your computer’s screen. 
  2. Click ‘Troubleshoot’ and choose ‘Advanced Options.’
  3. Click ‘Startup Settings’ and tap the ‘Restart’ button to restart the system. 
  4. Once the PC restarts, select an appropriate version of Safe Mode by pressing the corresponding key. 
  5. Hope, no more problem will arise after you have entered the Safe Mode. 

After reading this article, share your experience about it with us. If you find it risky to edit the Windows Registry, then consult with a technical expert. For any more queries or additional help, leave a reply in the comment section below.

11May/19

Confronting Error Code 0xc0000005? Eliminate This Error With Effective Hacks

Windows users often face the error code 0xc0000005 while trying to open or run any application or program. When this issue arises, it prevents users to launch several applications. At this juncture, you have the option to tap on the OK button. 

Sometimes, this issue occurs while trying to use any in-built tool of Windows Operating System. If you also face the same issue and tired of searching the solutions for this issue, then nothing to get worried about this. 

Here, in this post, you will know some of the amazing tips and tricks that can help you to troubleshoot this error. Hence, it is recommended to have a look at the guide provided below. 

What Causes the Error Code 0xc0000005?

Before going to implement the troubleshooting hacks, it is essential to identify the reasons for which the error occurs. There are several causes behind this error. Let’s have a look at the causes pointed below: 

  • Due to the third-party antivirus program, you can face this error. 
  • If the registry files of the system get corrupted, then also you can face this issue. 
  • Because of the corrupted, incorrect or faulty drivers of the system, you can also encounter this error. 
  • If the programs that are installed on your computer are not updated properly, then it also might be the reason behind this issue. 

Apparently, there is no specific reason for this error. Now, you are aware of the probable reasons behind this issue. Hence, you just need some hacks to troubleshoot this error.

Easy Tips and Tricks to Fix the Application was Unable to Start Correctly 0xc0000005:

Depending on the several causes, there are a lot of ways to troubleshoot this error. Hence, stick to the troubleshooting methods explained below: 

Procedure 1: Run the SFC or System File Checker

System File Checker is an in-built tool of Windows Operating System that helps the users to scan the computer for any corrupted system files. SFC also has the ability to fix the damaged system files of the system. 

How to Run the System File Checker? 

  1. At first, move the cursor to the bottom left corner of the window and click on the Start menu. 
  2. Then, type “cmd” on the Search bar of the Start menu. Right-click on the Command Prompt option showing as the search result. 
  3. Choose the ‘Run as Administrator’ option from the list to open the command prompt window with Administrator’s privilege. 
  4. Now, type “sfc/scannow” on the Command Prompt window and hit the Enter key from the keyboard to execute the command. 
  5. Now, the System File Checker started to scan the system for any damaged or corrupted system files. It will also fix the corrupted or damaged system files, if it finds any. 
  6. After completing the scanning procedure, you should exit from the current window and restart the system to apply the changes. 

Now, you should check whether the error has been resolved or not. If the issue persists, then move on to further solutions described below. 

Procedure 2: Using Windows Defender

Sometimes, virus or malware prevents the system to access multiple programs, applications, and tools. Hence, you can run a full scanning of the system to check if it can make any changes. 

Here, you can get the help of the Windows Defender. It is an in-built antivirus application that protects the system against any unwanted viruses, spyware, or other dangerous software. Else, you can also run another third-party antivirus programs, if they are installed on the system.

How to Run Windows Defender? 

  1. Go to the Start menu. 
  2. Type “virus” on the Search bar of the Start menu. 
  3. Tap on the ‘Virus and Threat protection’ option showing as the search result. 
  4. On the next window, navigate to the ‘Advanced Scan’ option. 
  5. Now, you should tap on the ‘Full scan’ option. 
  6. Click on the ‘Scan now’ button. 
  7. Now, the Windows Defender starts to scan the entire system for any malware or virus. If it succeeds in locating any virus or malware, then it will eliminate them. 

After that, restart the system to save the changes. Now, you should check whether the error code has been fixed or not. If you see that the issue still occurs, then go to the further solutions stated below. 

Procedure 3: Disable the Data Execution Prevention

If you face this error while trying to open any specific app or program, then you should try to combine the error with an exception in Data Execution Prevention or DEP. 

Data Execution Prevention is an in-built safety utility of Windows Operating System that can help you to protect the system from any unwanted viruses or security warnings. To deactivate this, you should perform the steps listed below: 

  1. At first, press the R and Windows key both at the same time from the keyboard to open the Run dialog box. 
  2. Now, type “sysdm.cpl” on the Run Command box. Press the Enter key from the keyboard to go to your target page. 
  3. It will navigate you to the System Properties window. Navigate to the ‘Advanced’ tab.
  4. Tap on the ‘Preferences’ option and then click on the gear-shaped ‘Settings’ icon.  
  5. After that, go to the ‘Data Execution Prevention’ tab from the next window. 
  6. Now, tick the box that prompts ‘Turn on DEP for all programs and services except those I select.’ 
  7. Tap on the ‘Add’ button. 
  8. Navigate to the ‘.exe’ folder of the application that is the principal reason for this error, select it and tap on the Open button. 
  9. Now, click on the ‘Apply’ option to apply the changes. 
  10. Exit from the System Properties window. 

After that, you should check whether the error still appears or not. It the error occurs, then go to the further solutions discussed below.

Procedure 4: Fix BCD

According to some users, they have solved this issue by fixing BCD. You have to re-activate the Windows Operating System after performing this method. To perform this, have a glance at the steps mentioned below: 

  1. In the beginning, hit the X and Windows Key simultaneously from the keyboard. Select Command Prompt (Admin) from the list. Else you can also open the Command Prompt by navigating to the Start menu.
  2. Now, type “bcdedit” on the Command Prompt window and hit the Enter from the keyboard to execute the command. If the Windows Boot Loader Path is ‘xOsload.exe’, then you need to eliminate some files and then repair the BCD. You will see this in the PATH field, after running the bcdedit command.
  3. Once done, run the commands given below. Press the Enter key after each command to execute them. 

1st: Del D:\Windows\System32\xOsload.exe

2nd: Del D:\Windows\System32\xNtKrnl.exe

3rd: Del D:\Windows\System32\Drivers\oem-drv64.sys

4th: attrib c:\boot\bcd -h -r -s

5th: ren c:\boot\bcd bcd.old

6th: bootrec /rebuildbcd

After that, close the Command Prompt window and restart the system to apply the changes. Now, you should try to open an application to check if the error persists or not. If the error still appears, then go to the further methods provided below. 

Procedure 5: Restore the System

After completing the above techniques, if you still encounter the same error, then you have to restore the system to its previous state. To perform the system restoration procedure, you have to create a Restore point. 

By creating the Restore point, you can bring back the system to its initial working position. It does not put any harmful effect on the files or data of the system. 

How can you Restore the Computer to its Initial Position? 

  1. First, launch the Run box by pressing the R and Windows key simultaneously from the keyboard. 
  2. Now, type “rstrui.exe” in the Run Command box. Press the Enter key from the keyboard to go to your target page. It will transfer you to the System Restore window. Click on the Next option.
  3. If there is available any Restore point on your computer, then you will see that on the list. 
  4. Now, tick the checkbox that prompts ‘Show more restore points.’ It will show other restore points that are available on the system. 
  5. Select the Restore point that matches you the best (depending on the time when it was built). 
  6. Click on the Next option. Then, you have to confirm the Restore point of your computer and tap on the Finish button. 

After that, you should close the current window and try to launch any program to check whether this issue has been resolved. 

Final Recommendation

In the above post, we have described some of the easiest ways to troubleshoot the application was unable to start correctly 0xc0000005. We hope that after performing the above ways, it will definitely assist you to put an end to this error. 

After implementing the above-mentioned ways or while performing the above ways, if you face any kinds of trouble, then you should connect with a tech expert. In addition, you can also share your doubts and valuable feedback through the comment section given at the end of this guide.