Fix Windows 10 Won’t Boot with Proven Tricks

Users generally experience Windows 10 won’t boot just after upgrading or installing Windows 10 Operating System on their PC. It is really a problematic moment when your PC suddenly keeps on crashing and fail to boot. 

However, there are several ways to fix the error without resorting to any technical support. So, if you are struggling with this issue, then this article can provide you with the best solutions. 

Windows 10 Won’t Boot After Update? Implement the Methods to Resolve the Error

We have listed most of the common ways to get rid of this issue. Now, apply the methods accordingly to get rid of the error at the earliest.

Solution 1: Unplug External Devices

Before starting with this process, ensure that your PC completes the POST process. The POST will be completed successfully if your computer boots and the POST bar fills up completely. 

At times, the hardware interferes with the booting process of the PC. Hence, remove any external devices like printer, USB devices, digital camera, scanner, CD/DVD, and so on. 

Only keep mouse and keyboard attached to your PC. Now turn off the PC and unplug the computer from the source of power. After a few seconds, connect back the PC to the power outlet and restart it to check whether it boots correctly or not. 

Solution 2: Run Your PC into the Safe Mode

Safe Mode will help you to start the PC with important files and drivers only. So, enable the Safe Mode by the following steps to see whether the system boots up in this mode or not. 

  1. At first, open the Settings app from the Start menu. 
  2. Expand the ‘Update and Security’ section on the Settings window and select the ‘Recovery’ option. 
  3. Click the ‘Advanced startup’ menu and choose the ‘Restart Now’ button. 
  4. You will be directed to the ‘Choose an Option’ screen from where you need to select the ‘Troubleshoot’ option. 
  5. Then, click ‘Advanced options’ and navigate to ‘Startup Settings.’
  6. Click the ‘Restart’ button and press ‘F4’ once your computer restarts. 
  7. Now your PC will boot in Safe Mode if the methods work out correctly.

If the computer boots in Safe Mode, then follow the steps given below to exit this mode. 

  1. Right-click the ‘Start’ button and select ‘Run’ from the context menu. 
  2. Type ‘misconfig’ into the Run dialog box and press ‘Enter’ key.
  3. On the Microsoft Configuration window, click the ‘Boot’ tab and uncheck the ‘Safe Boot’ option. 
  4. Restart the system in order to boot the PC normally. 

Solution 3: Reset the PC

This solution will let you choose which files you would like to keep and which you want to remove. Go by the following steps to rest your PC and reinstall Windows. 

  1. First, go to Settings and move to the ‘Update and Security’ section. 
  2. Choose the ‘Recovery’ option and click the ‘Reset this PC’ button. 
  3. Then click the ‘Get Started’ button and select the ‘Keep my files’ option. 
  4. It will delete all your personal files and reset the settings of your PC. 

Note: This process will remove the apps that you have installed on your PC and reinstall the pre-installed apps only. 

Proceed to the next solution if your PC fails to boot after trying out this solution. 

Solution 3: Restore the System to a Previous Version

System restore seems to be the ultimate solution for many Windows problems. Therefore, restore your Windows Operating System to a time period before Windows 10 won’t boot issue has begun. Even you can create a restore point manually by the following steps: 

  1. Go to the Start menu,  and type ‘system restore’ in the search bar and press ‘Enter.’
  2. Then select ‘Create a restore point’ from search results and enter your administrator password if asked. 
  3. As the ‘System Properties’ dialog box appears, click ‘System Restore’ on it and hit the ‘Next’ button. 
  4. It will then restore your PC to a correct working state. 
  5. Finally, click ‘Next’ and then the ‘Finish’ button to end this process. 

Note: It is safe to perform a system restore as it isn’t going to affect your files. However, apps, drivers, and updates installed on your PC after the restore point was created might disappear. If that happens, then you can recover them by the following steps:

  1. Right-click on the Start menu and select the Control Panel option. 
  2. Type ‘Recover’ option into the Control Panel search box and press the ‘Enter’ key.
  3. Then, select the ‘Recovery’ option, click the ‘Open System Restore’ link and tap ‘Next.’
  4. After that, select the restore point to which you have restored your system in the above steps. 
  5. Then, click on the ‘Next’ and ‘Finish’ buttons to complete this process. 

Solution 4: Perform an Automatic Repair

In this method, you can create a Media Creation tool and use it for an automatic repair. If you have a Windows installation disk, then do as we have discussed below. 

  1. Insert the Windows installation disk or USB drive into your PC and turn on your PC. 
  2. When prompted, press a key on the keyboard to boot from the installation disk. 
  3. When the Install Windows page is displayed on the computer’s screen, select ‘Repair your computer’ option. 
  4. Click ‘Choose an option screen’ on the Windows Recovery Environment screen.
  5. Then, navigate to the ‘Troubleshoot’ menu and click ‘Advanced Options.’
  6. After that, select ‘Automatic Repair’ to start the automatic repair process. 

Note: You can access the BIOS settings on your PC and change the boot order. Here you will be able to start from the disk or USB without pressing a key on the keyboard. 

Solution 5: Change the Boot Order for an Automatic Repair

Be cautious before changing the BIOS settings as the BIOS interface is designed for advanced users. Otherwise, an incorrect change in settings might prevent your PC from booting correctly. It is clearly discussed below how to change the boot order and perform an automatic repair. Therefore, do the following:

  1. At first, you will need to enter the BIOS Setup Utility by pressing the appropriate key on the keyboard. 
  2. F2, F10, Esc, and Delete are generally used for entering the BIOS setup on most computers. 
  3. After entering the BIOS Setup Utility, click the ‘Boot Order,’ ‘Boot Options’ or ‘simply ‘Boot’ labeled tab. 
  4. Then, scroll down the ‘Boot’ list to locate the removable device.
  5. Use the arrow keys to move the drive at the first place in the ‘Boot’ list and hit the ‘Enter’ key. 
  6. It changes the boot order sequence of your PC and the press ‘F10’ to save the changes and close the BIOS Setup Utility. 
  7. Click ‘Yes’ on the confirmation dialog box and wait for the PC to restart normally. 
  8. Now select your preferred language, time, currency, and more options and click on ‘Next.’ 
  9. Then, click on the ‘Repair your computer’ link, select the Operating System you would like to repair and click ‘Next’ again. 
  10. Select ‘Troubleshoot’ on the ‘Choose an option’ screen and click on the ‘Advanced Options.’
  11. In the end, choose ‘System Restore’ or ‘Startup Repair’ to repair your PC automatically. 

Solution 6: Connect Another Video Output to Your PC

Several users have solved ‘Windows 10 won’t boot after update’ issue after trying a different video output combination. To do so, connect your PC to another adapter. For instance, if the adapter was integrated graphics, then change it to a discrete card and vice versa. Then, connect change the output from Display Port to VGA, HDMI to DVI, and so on. 

Solution 7: Boot Your PC in Safe Mode with Networking

Safe Mode with Networking is a feature that starts Windows in Safe Mode along with the network drivers and services required to access the internet. Here, we have explained how to boot in Safe Mode with Networking. 

  1. Restart the PC and hold down the ‘Shift’ key as Windows displays the ‘Sign-in’ screen. 
  2. Click on the ‘Power’ button and select ‘Restart.’
  3. Then, click ‘Troubleshoot,’ choose ‘Advanced Options’ and select ‘Restart’ under ‘startup Settings.’
  4. When your PC restarts, press ‘5’ or ‘F5’ to enable the Safe Mode with Networking feature. 

Solution 8: Use System File Checker and DISM Tools

This solution will help you if corrupted system files are preventing the Windows from booting. 

  1. Click on the Start menu, and type ‘cmd’ or ‘command’ in the search box and press ‘Enter.’
  2. Right-click on Command Prompt in the search result and select ‘Run and Administrator.’
  3. Now enter ‘sfc/scannow’ in the command line on the Command Prompt window. 
  4. The System File Check tool launches on your PC and scans the system files. 
  5. After the tool has repaired all corrupted files, restart the system. 

If Windows again fails to boot properly, then you need to fix the Windows corruption errors like a damaged file on your PC. That’s why you need to launch the DISM tool by the following steps:

  1. Go back to the Command Prompt window or open a new window and copy paste the command ‘Dism /Online /Cleanup-Image /RestoreHealth’ on it. 
  2. The DISM tool begins to scan your PC and repair the damaged files if any. 
  3. Restart the system to ensure that it boots up normally. 

Solution 9: Perform a Clean Boot

Sometimes conflicts arise due to applications and services running at the startup or background of your PC. As a result, Windows fails to boot properly. Thus, a clean boot will reduce these conflicts and fix the Windows 10 won’t boot issue instantly. Hence, you can successfully perform a clean boot by the following steps:

  1. Type ‘misconfig’ into the search box and press ‘Enter’ to open the System Configuration window. 
  2. Go to the ‘Services’ tab and check the ‘Hide all Microsoft services’ box under it. 
  3. Next, tap the ‘Disable All’ button and open the Task Manager.
  4. Then, close the Task Manager and hit the ‘OK’ button. 
  5. Lastly, reboot your PC and see whether it boots as usual or not. 

Hope, like many other users, you will also be able to fix the Windows 10 won’t boot issue by the aforesaid solutions. If not, then leave us feedback in the comment section or connect with a tech expert soon.